Hello, git clone -b denzil git://git.yoctoproject.org/poky.git Yocto Project 1.2.1 The default beagleboard kernel 3.0 would not find the mmc as in Yocto Project 1.2
modified the file meta-yocto/conf/machine/beagleboard.conf PREFERRED_VERSION_linux-yocto ?= "3.0%" --> PREFERRED_VERSION_linux-yocto ?= "3.2%" git status # On branch denzil # Changes not staged for commit: # (use "git add <file>..." to update what will be committed) # (use "git checkout -- <file>..." to discard changes in working directory) # # modified: meta-yocto/conf/machine/beagleboard.conf # # Untracked files: # (use "git add <file>..." to include in what will be committed) # # build/ no changes added to commit (use "git add" and/or "git commit -a") MACHINE=beagleboard bitbake -v -D -D -D core-image-sato mkfs.vfat -F 16 -n "boot" /dev/sdb1 /dev/sdb1 W95 FAT32 (LBA) (Bootable) mke2fs -j -L "rootfs" /dev/sdb2 /dev/sdb2 Ext3 (version 1.0) cd /home/vidal/poky/build/tmp/deploy/images cp MLO-beagleboard-1.5.0+git1+9f94c6577e3a018b6b75cbe39f32bb331871f915-r0 /run/media/vidal/boot/MLO cp u-boot-beagleboard-v2011.06+git12+b1af6f532e0d348b153d5c148369229d24af361a-r1.bin /run/media/vidal/boot/u-boot.bin cp uImage-3.2.18+git1+49f931bc294d5b6be60502bbd448cff5aa766235_1+90e3138c5a2a390dd6ddf2ed84fe5a9756d43397-r1-beagleboard-20120720032419.bin /run/media/vidal/boot/uImage cp /home/vidal/uEnv.txt /run/media/vidal/boot/ cd /run/media/vidal/rootfs/ tar jxf /home/vidal/poky/build/tmp/deploy/images/core-image-sato-beagleboard-20120720032419.rootfs.tar.bz2 * - * Qodem 0.1.2 Capture Generated Fri, 20 Jul 2012 06:02:09 -0600 BEGIN * - * Texas Instruments X-Loader 1.5.0 (Jul 19 2012 - 17:05:29) Beagle xM Reading boot sector Loading u-boot.bin from mmc U-Boot 2011.06 (Jul 19 2012 - 21:25:33) OMAP3630/3730-GP ES2.1, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz OMAP3 Beagle board + LPDDR/NAND I2C: ready DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0 *** Warning - readenv() failed, using default environment In: serial Out: serial Err: serial Beagle unknown 0x02 No EEPROM on expansion board Die ID #158000029ff800000160a7450b02602d Hit any key to stop autoboot: 10 9 8 7 6 5 4 3 2 1 0 SD/MMC found on device 0 reading uEnv.txt 130 bytes read Importing environment from mmc ... reading uImage 3375856 bytes read Booting from mmc ... ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux-3.2.9-yocto-standard Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3375792 Bytes = 3.2 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 3.2.9-yocto-standard ([email protected]) (gcc version 4.6.4 20120303 (prerelease) (GCC) ) #1 Thu Jul 19 21:30:00 MDT 2012 CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine: OMAP3 Beagle Board Reserving 16777216 bytes SDRAM for VRAM Memory policy: ECC disabled, Data cache writeback OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk ) Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125952 Kernel command line: console=tty0 console=ttyO2,115200n8 mpurate=auto vram=16M omapfb.mode=dvi:hd720 omapfb.vram=0:8M,1:4M,2:4M omapfb.debug=y omapdss.def_disp=dv i root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) allocated 2097152 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Memory: 496MB = 496MB total Memory: 493816k/493816k available, 30472k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB) lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc06540a4 (6449 kB) .init : 0xc0655000 - 0xc06ab000 ( 344 kB) .data : 0xc06ac000 - 0xc0710868 ( 403 kB) .bss : 0xc071088c - 0xc075486c ( 272 kB) SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS:410 IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts Total of 96 interrupts on 1 active controller OMAP clockevent source: GPTIMER12 at 32768 Hz sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms Console: colour dummy device 80x30 console [tty0] enabled Calibrating delay loop... 503.12 BogoMIPS (lpj=1966080) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 512 Initializing cgroup subsys debug Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys blkio CPU: Testing write buffer coherency: ok ftrace: allocating 18273 entries in 54 pages devtmpfs: initialized print_constraints: dummy: NET: Registered protocol family 16 GPMC revision 5.0 OMAP GPIO hardware version 2.5 omap_mux_init: Add partition: #1: core, flags: 0 OMAP3 Beagle Rev: xM C Reprogramming SDRC clock to 332000000 Hz Found NAND on CS0 Registering NAND on CS0 Unable to get DVI reset GPIO omap-mcbsp.2: alias fck already exists omap-mcbsp.3: alias fck already exists OMAP DMA hardware revision 5.0 bio: create slab <bio-0> at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb omap_i2c omap_i2c.1: bus 1 rev1.4.0 at 2600 kHz twl4030: PIH (irq 7) chaining IRQs 368..375 twl4030: power (irq 373) chaining IRQs 376..383 twl4030: gpio (irq 368) chaining IRQs 384..401 _omap_mux_init_gpio: Could not set gpio192 print_constraints: VUSB1V5: 1500 mV normal standby print_constraints: VUSB1V8: 1800 mV normal standby print_constraints: VUSB3V1: 3100 mV normal standby twl4030_usb twl4030_usb: Initialized TWL4030 USB module print_constraints: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby print_constraints: VDAC: 1800 mV normal standby print_constraints: VDVI: 1800 mV normal standby print_constraints: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby omap_i2c omap_i2c.3: bus 3 rev1.4.0 at 100 kHz Advanced Linux Sound Architecture Driver Version 1.0.24. cfg80211: Calling CRDA to update world regulatory domain Switching to clocksource 32k_counter musb-hdrc: version 6.0, ?dma?, otg (peripheral+host) musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Registering unionfs 2.5.10 (for 3.1.0-rc4) msgmni has been set to 964 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) OMAP DSS rev 2.0 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0 omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1 omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2 console [ttyO2] enabled omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3 brd: module loaded omap2-nand driver initializing No NAND device found No NAND device found usbcore: registered new interface driver kaweth pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver usbcore: registered new interface driver pegasus usbcore: registered new interface driver asix usbcore: registered new interface driver cdc_ether usbcore: registered new interface driver dm9601 usbcore: registered new interface driver smsc75xx usbcore: registered new interface driver smsc95xx usbcore: registered new interface driver net1080 usbcore: registered new interface driver cdc_subset usbcore: registered new interface driver zaurus usbcore: registered new interface driver MOSCHIP usb-ethernet driver usbcore: registered new interface driver int51x1 cdc_ncm: 04-Aug-2011 usbcore: registered new interface driver cdc_ncm ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver _regulator_get: ehci-omap.0 supply hsusb0 not found, using dummy regulator _regulator_get: ehci-omap.0 supply hsusb1 not found, using dummy regulator ehci-omap ehci-omap.0: OMAP-EHCI Host Controller ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 ehci-omap ehci-omap.0: irq 77, io mem 0x48064800 ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mousedev: PS/2 mouse device common for all mice twl_rtc twl_rtc: Power up reset detected. twl_rtc twl_rtc: Enabling TWL-RTC. twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: USB HID core driver OMAP3 Beagle/Devkit8000 SoC init usb 1-2: new high-speed USB device number 2 using ehci-omap asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok ALSA device list: #0: omap3beagle TCP cubic registered NET: Registered protocol family 17 Registering the dns_resolver key type VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 ThumbEE CPU extension supported. sr_init: No PMIC hook to init smartreflex smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized SmartReflex Class3 initialized clock: disabling unused clocks to save power registered taskstats version 1 omapfb omapfb: no driver for display: dvi omapfb omapfb: cannot parse default modes hub 1-2:1.0: USB hub found hub 1-2:1.0: 5 ports detected Console: switching to colour frame buffer device 90x35 mmc0: host does not support reading read-only switch. assuming write-enable. regulator_init_complete: VDVI: incomplete constraints, leaving on console [netcon0] enabled netconsole: network logging started mmc0: new high speed SDHC card at address 1234 mmcblk0: mmc0:1234 SA08G 7.41 GiB twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) mmcblk0: p1 p2 usb 1-2.1: new high-speed USB device number 3 using ehci-omap smsc95xx v1.0.4 smsc95xx 1-2.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0-2.1, smsc95xx USB 2.0 Ethernet, fe:a3:5a:02:39:a3 usb 1-2.3: new low-speed USB device number 4 using ehci-omap input: CHESEN USB Keyboard as /devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-2/1-2.3/1-2.3:1.0/input/input0 generic-usb 0003:0A81:0101.0001: input: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-ehci-omap.0-2.3/input0 input: CHESEN USB Keyboard as /devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-2/1-2.3/1-2.3:1.1/input/input1 generic-usb 0003:0A81:0101.0002: input: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-ehci-omap.0-2.3/input1 usb 1-2.5: new low-speed USB device number 5 using ehci-omap input: PixArt USB Optical Mouse as /devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-2/1-2.5/1-2.5:1.0/input/input2 generic-usb 0003:093A:2510.0003: input: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-ehci-omap.0-2.5/input0 kjournald starting. Commit interval 5 seconds EXT3-fs (mmcblk0p2): using internal journal EXT3-fs (mmcblk0p2): recovery complete EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode VFS: Mounted root (ext3 filesystem) on device 179:2. devtmpfs: mounted Freeing init memory: 344K INIT: usb 1-2.5: USB disconnect, device number 5 usb 1-2.5: new low-speed USB device number 6 using ehci-omap input: PixArt USB Optical Mouse as /devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-2/1-2.5/1-2.5:1.0/input/input3 generic-usb 0003:093A:2510.0004: input: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-ehci-omap.0-2.5/input0 udev[61]: starting version 164 smsc95xx 1-2.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 usb 1-2.5: USB disconnect, device number 6 usb 1-2.5: new low-speed USB device number 7 using ehci-omap input: PixArt USB Optical Mouse as /devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-2/1-2.5/1-2.5:1.0/input/input4 generic-usb 0003:093A:2510.0005: input: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-ehci-omap.0-2.5/input0 usb 1-2.5: USB disconnect, device number 7 usb 1-2.5: new low-speed USB device number 8 using ehci-omap input: PixArt USB Optical Mouse as /devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-2/1-2.5/1-2.5:1.0/input/input5 generic-usb 0003:093A:2510.0006: input: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-ehci-omap.0-2.5/input0 usb 1-2.5: USB disconnect, device number 8 usb 1-2.5: new low-speed USB device number 9 using ehci-omap input: PixArt USB Optical Mouse as /devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-2/1-2.5/1-2.5:1.0/input/input6 generic-usb 0003:093A:2510.0007: input: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-ehci-omap.0-2.5/input0 usb 1-2.5: USB disconnect, device number 9 usb 1-2.5: new low-speed USB device number 10 using ehci-omap input: PixArt USB Optical Mouse as /devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-2/1-2.5/1-2.5:1.0/input/input7 generic-usb 0003:093A:2510.0008: input: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-ehci-omap.0-2.5/input0 usb 1-2.5: USB disconnect, device number 10 usb 1-2.5: new low-speed USB device number 11 using ehci-omap input: PixArt USB Optical Mouse as /devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-2/1-2.5/1-2.5:1.0/input/input8 generic-usb 0003:093A:2510.0009: input: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-ehci-omap.0-2.5/input0 usb 1-2.5: USB disconnect, device number 11 usb 1-2.5: new low-speed USB device number 12 using ehci-omap input: PixArt USB Optical Mouse as /devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-2/1-2.5/1-2.5:1.0/input/input9 generic-usb 0003:093A:2510.000A: input: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-ehci-omap.0-2.5/input0 * - * Qodem 0.1.2 Capture Generated Fri, 20 Jul 2012 06:10:13 -0600 END * - * The boot never gets to the point of bringing up an X window on the beagleboard display. Thanks for any help it will be appreciated.
_______________________________________________ yocto mailing list [email protected] https://lists.yoctoproject.org/listinfo/yocto
