On 12/05/2012 06:46 AM, Bruce Ashfield wrote:
On 12-12-05 09:42 AM, Elvis Dowson wrote:
Hi,

On Dec 5, 2012, at 5:21 PM, Andreas Schweigstill
<andr...@schweigstill.de> wrote:

I have also tried to build a kernel and root filesystem for Zynq but
the kernel
gets stuck when booting, regardless if on the ZC702 board or on Qemu.
I tried
Poky denzil and Poky danny.

Also the alternate meta-zynq layer from git.yoctoproject.org shows
the same
behaviour.

These are the last console messages which I get:
## Booting kernel from Legacy Image at 01000000 ...
   Image Name:   Linux-3.2.11-yocto-standard
   Created:      2012-12-04  20:07:37 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2997472 Bytes = 2.9 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 01a80000
   Booting using the fdt blob at 0x1a80000
   Loading Device Tree to 0eff8000, end 0efff185 ... OK
   Loading Kernel Image ... OK
OK
   Loading Device Tree to 0efed000, end 0eff7185 ... OK

Starting kernel ...


Instead of using Linux kernel version 3.5-xilinx I always get
Linux-3.2.11-yocto-standard which is obviously missing the
Zynq patches.

meta-zynq/recipes-kernel-linux-zynq contains the following lines:
LINUX_VERSION ?= "3.5"
LINUX_VERSION_EXTENSION ?= "-xilinx"

How can I force Yocto to build kernel 3.5-xilinx?


 From you messages, I infer that you are using the meta-zynq layer
located here:

http://git.yoctoproject.org/cgit/cgit.cgi/meta-zynq/

For my builds, I used Philip Ballister's meta-zynq layer located here
for the simple reason that it uses xilinx git repository:

https://github.com/balister/meta-zynq

And in case anyone is wondering, efforts are (still) underway to
get a single unified layer for this board (and others), but getting
all the moving parts organized is taking a bit longer than expected
or than we would like.

Thanks! Should we go ahead and set the list up so interested parties can start coordinating our existing work?

Philip


Cheers,

Bruce


Also, try to ensure that you don't put both the meta-layers in your
bblayers.conf file
while building, and ensure that you set machine as follows in your
local.conf file

MACHINE ?= "zynq-zc702"

Do let me know how it goes!

Best regards,

Elvis Dowson
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto


_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto


_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto

Reply via email to