Unfortunately "tec_config" didnot work. Here is the error message
Log data follows: | DEBUG: Executing shell function do_compile | NOTE: make -j 8 CROSS_COMPILE=arm-poky-linux-gnueabi- CC=arm-poky-linux-gnueabi-gcc --sysroot=/home/build/yocto/poky/buildTamonten/tmp/sysroots/skidata-tamonten tec_config | make: *** No rule to make target `tec_config'. Stop. | make: *** [tec_config] Error 1 | ERROR: oe_runmake failed | ERROR: Function failed: do_compile (see /home/build/yocto/poky/buildTamonten/tmp/work/skidata_tamonten-poky-linux-gnueabi/u-boot-v2012.04.01+git3+415d386877df49eb051b85ef74fa59a16dc17c7d-r2/temp/log.do_compile.21665 for further information) ERROR: Task 69 (/home/build/yocto/poky/meta/recipes-bsp/u-boot/ u-boot_2012.04.01.bb, do_compile) failed with exit code '1' NOTE: Tasks Summary: Attempted 3421 tasks of which 319 didn't need to be rerun and 1 failed. On Tue, Feb 19, 2013 at 3:58 PM, Gary Thomas <[email protected]> wrote: > On 2013-02-19 06:28, Satya Swaroop Damarla wrote: > >> Hi, >> >> I want to build a basic image for the Avionic Tamonten board using Yocto. >> SO, I created a skidata-tamonten.conf in the list of machines based on the >> beagleboard.conf but I dont >> know what to add for the UBOOT_MACHINE= . I tried my best to use the same >> "omap_beagle_conf" but it doesnot boot properly. Here is the >> skidata-tamonten.conf file description >> >> > Try 'tec_config' > > #@TYPE: Machine >> #@NAME: skidata-tamonten machine >> #@DESCRIPTION: Machine configuration for the Tamonten board >> >> PREFERRED_PROVIDER_virtual/**xserver ?= "xserver-xorg" >> XSERVER ?= "xserver-xorg \ >> xf86-input-evdev \ >> xf86-input-mouse \ >> xf86-video-omapfb \ >> xf86-input-keyboard" >> >> # Ship all kernel modules by default >> MACHINE_EXTRA_RRECOMMENDS = " kernel-modules" >> >> # Allow for MMC booting () >> EXTRA_IMAGEDEPENDS += "u-boot" >> >> # Uncomment the following line to enable the hard floating point abi. >> Note that >> # this breaks some binary libraries and 3D (neither of which ship with >> # meta-yocto). For maximum compatibility, leave this disabled. >> DEFAULTTUNE ?= "cortexa9thf" >> include conf/machine/include/tune-**cortexa9.inc >> >> IMAGE_FSTYPES += "tar.bz2 ext2 ext3" >> >> SERIAL_CONSOLE = "115200 ttyO2" >> >> PREFERRED_PROVIDER_virtual/**kernel ?= "linux-yocto" >> PREFERRED_VERSION_linux-yocto ?= "3.2%" >> >> KERNEL_IMAGETYPE = "uImage" >> >> PREFERRED_VERSION_u-boot ?= "v2012.04%" >> >> UBOOT_MACHINE = "???????????????????" >> >> UBOOT_ENTRYPOINT = "0x00008000" >> UBOOT_LOADADDRESS = "0x00008000" >> >> MACHINE_FEATURES = "usbgadget usbhost vfat alsa screen touchscreen >> keyboard" >> >> >> Greetings & Regards, >> Swaroop >> >> >> >> ______________________________**_________________ >> yocto mailing list >> [email protected] >> https://lists.yoctoproject.**org/listinfo/yocto<https://lists.yoctoproject.org/listinfo/yocto> >> >> > -- > ------------------------------**------------------------------ > Gary Thomas | Consulting for the > MLB Associates | Embedded world > ------------------------------**------------------------------ > ______________________________**_________________ > yocto mailing list > [email protected] > https://lists.yoctoproject.**org/listinfo/yocto<https://lists.yoctoproject.org/listinfo/yocto> >
_______________________________________________ yocto mailing list [email protected] https://lists.yoctoproject.org/listinfo/yocto
