My kernel is not starting.. I compiled it fora modified version of Avionic
Tamonten board... May I know the potential reasons
U-Boot 2009.11.1-dirty (Nov 03 2011 - 10:04:17)
TEGRA2
Board: Tegra2 Harmony board
DRAM: 512 MB
NAND: Chip Id: 0x20 (Handheld SOC) Major: 0x1 Minor: 0x3 SKU: 0x8
512 MiB
MMC: Sdmmc dev 0... not found
Sdmmc dev 1... detected card
EMMC Probed Successfully. Detected 1 card(s).
*** Warning - bad CRC or NAND, using default environment
In: serial
Out: serial
Err: serial
Net: No ethernet found.
(Re)start USB...
USB: Tegra ehci init hccr c5008100 and hcor c5008140 hc_length 64
Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... 0 Storage Device(s) found
scanning bus for ethernet devices... 1 Ethernet Device(s) found
Hit any key to stop autoboot: 0
Loading file "/boot/uImage" from mmc device 1:1 (xxb1)
4021264 bytes read
## Booting kernel from Legacy Image at 17000000 ...
Image Name: Linux-3.2.32-yocto-standard
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4021200 Bytes = 3.8 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
replacing commandline [mem=384M@0M nvmem=128M@384M vmalloc=384M
video=tegrafb console=ttyS0,115200n8 tegraboot=nand
mtdparts=tegra_nand:358400K@29952K(system) usbcore.old_scheme_first=1 rw
root=/dev/disk/by-]
adding initrd tag 0x00000000, 0x00000000
tag: size=0x00000002 tag=0x54410001 (ATAG_CORE)
tag: size=0x00000004 tag=0x54410006 (ATAG_SERIAL)
tag: size=0x00000102 tag=0x54410009 (ATAG_CMDLINE)
Starting kernel ...
Cheers,
Satya
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
