Hi all, I've built a new meta layer image based on core-image-minimal and core-image-sato.
After the successful build, whey I run "runqemu" with the image, my qemu image won't get a dhcp IP. I can manually assign IP after the boot up. Does anyone know why or which log to look at? Here is the message from qemu --------- Configuring network interfaces... udhcpc (v1.20.2) started Sending discover... Sending discover... Sending discover... No lease, failing [ 20.280668] rc (824) used greatest stack depth: 5632 bytes left INIT: Entering runlevel: 5 Starting syslogd/klogd: done Stopping Bootlog daemon: bootlogd. ---------- Here is the host side message ---------- $ runqemu tmp/deploy/images/bzImage-3.8-dl7-dl-qemux86-20130303034712.bin tmp/deploy/images/core-image-minimal-dev-dl-qemux86-20130306045344.rootfs.ext3 Set MACHINE to [qemux86] based on kernel [tmp/deploy/images/bzImage-3.8-dl7-dl-qemux86-20130303034712.bin] Continuing with the following parameters: KERNEL: [tmp/deploy/images/bzImage-3.8-dl7-dl-qemux86-20130303034712.bin] ROOTFS: [tmp/deploy/images/core-image-minimal-dev-dl-qemux86-20130306045344.rootfs.ext3] FSTYPE: [ext3] Setting up tap interface under sudo Acquiring lockfile for tap0... WARNING: distccd not present, no distcc support loaded. Running qemu-system-i386... /home/insop/mybuilds/dl/tmp/sysroots/x86_64-linux/usr/bin/qemu-system-i386 -kernel tmp/deploy/images/bzImage-3.8-dl7-dl-qemux86-20130303034712.bin -net nic,vlan=0 -net tap,vlan=0,ifname=tap0,script=no,downscript=no -hda tmp/deploy/images/core-image-minimal-dev-dl-qemux86-20130306045344.rootfs.ext3 -show-cursor -usb -usbdevice wacom-tablet -vga vmware -no-reboot -m 128 --append "vga=0 root=/dev/hda rw mem=128M ip=192.168.7.2::192.168.7.1:255.255.255.0 oprofile.timer=1 " ------------- Thank you, Insop _______________________________________________ yocto mailing list [email protected] https://lists.yoctoproject.org/listinfo/yocto
