On 2013-04-23 06:29, Andreas Enbacka wrote:
Hello,
Thanks a lot for info, I will try with that.
//Andreas
-----Original Message-----
From: Burton, Ross [mailto:[email protected]]
Sent: 23. huhtikuuta 2013 15:09
To: Andreas Enbacka
Cc: [email protected]
Subject: Re: [yocto] Splashscreen using psplash
On 23 April 2013 13:03, Andreas Enbacka <[email protected]> wrote:
I am creating a custom image based on core-image-sato, with a custom splash
screen (using psplash). I have been able to replace the default yocto
splashscreen in my image, however, my question is whether it is possible to
hide the initial console output text displayed on the screen prior to
showing the splashscreen? Currently most of the boot process is completed
at the stage when the splash screen is being displayed on screen. This is
because the image should be used as part of an embedded device, and the
end-user should not see any traces of the underlying linux distro.
Passing "quiet" to the kernel (APPEND+="quiet" in local.conf will do
it for testing) should stop the majority of the text. A full
splash-from-bootloader is possible if you have a bootloader that
displays the image, and then a silent kernel from there.
Note: AFAICT this will only work if booting using grub or syslinux, not U-Boot
or some other embedded bootstrap.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
