On 13-12-11 06:30 AM, Sudhangathan B S wrote:
Thanks Bruce, I now understood a little more..!
So if I put the defconfig file in the place it is looking for (kindly
note, it is looking for defconfig within yocto folders, it is is not
looking for defconfig in my external src directory), it then throws this
error:
NOTE: Executing RunQueue Tasks
ERROR: Function failed: do_configure (see
/home/desen555/yocto/build/tmp/work/overo-poky-linux-gnueabi/linux-omap-khilmanpm/3.5-r0/temp/log.do_configure.683
for further information)
ERROR: Logfile of failure stored in:
/home/desen555/yocto/build/tmp/work/overo-poky-linux-gnueabi/linux-omap-khilmanpm/3.5-r0/temp/log.do_configure.683
Log data follows:
| DEBUG: Executing python function sysroot_cleansstate
| DEBUG: Python function sysroot_cleansstate finished
| DEBUG: Executing shell function do_configure
| NOTE: make oldconfig
| make: *** No rule to make target `oldconfig'. Stop.
| ERROR: oe_runmake failed
| ERROR: Function failed: do_configure (see
/home/desen555/yocto/build/tmp/work/overo-poky-linux-gnueabi/linux-omap-khilmanpm/3.5-r0/temp/log.do_configure.683
for further information)
ERROR: Task 2
(/home/desen555/yocto/poky/meta-dese_iisc/recipes-kernel/linux/linux-omap-khilmanpm_3.5.bb
<http://linux-omap-khilmanpm_3.5.bb>, do_configure) failed with exit
code '1'
NOTE: Tasks Summary: Attempted 545 tasks of which 544 didn't need to be
rerun and 1 failed.
No currently running tasks (264 of 559)
Summary: 1 task failed:
/home/desen555/yocto/poky/meta-dese_iisc/recipes-kernel/linux/linux-omap-khilmanpm_3.5.bb
<http://linux-omap-khilmanpm_3.5.bb>, do_configure
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
desen555@Xeon-S5000XVN:~/yocto/build$
Now I hope you have more information...!!
My external src directory has got the .config file.
I need to launch a test build to see if there's been some breakage
recently.
I didn't quite get to that today .. but will have a go at it ASAP.
Bruce
---------------------------------
Sudhangathan BS
Ph:(+91) 9731-905-205 <tel:%28%2B91%29%209731-905-205>
---------------------------------
On Wed, Dec 11, 2013 at 12:43 PM, Bruce Ashfield
<[email protected] <mailto:[email protected]>> wrote:
On 12/11/2013, 2:00 AM, Sudhangathan B S wrote:
Hi, I'm having this issue, I'm not able to compile a kernel
source which
I have in my system, locally.
This is my recipe, after following instructions at
http://www.yoctoproject.org/__docs/1.4/dev-manual/dev-__manual.html#building-software-__from-an-external-source
<http://www.yoctoproject.org/docs/1.4/dev-manual/dev-manual.html#building-software-from-an-external-source>
require linux.inc
#THIS TEMPLATE COPIED FROM linux-sakoman_3.5.bb
<http://linux-sakoman_3.5.bb>
<http://linux-sakoman_3.5.bb>
DESCRIPTION = "Linux kernel for OMAP processors"
LIC_FILES_CHKSUM =
"file://COPYING;md5=__d7810fab7487fb0aad327b76f1be7c__d7"
KERNEL_IMAGETYPE = "uImage"
COMPATIBLE_MACHINE = "overo"
FILESEXTRAPATHS_prepend := "${THISDIR}/linux-omap-__khilmanpm:"
PV = "3.5"
inherit externalsrc
S =
"/home/desen555/suan_work/__kernel_work/khilman35-src-__mods/linux-omap-khilmanpm"
B = "${WORKDIR}/git"
SRC_URI = "file://defconfig \
file://omap2plus_defconfig \
file://usb_off.patch \
"
As you can see the kernel source directory is in S variable.
When the command "bitbake virtual/kernel" is run, i get this output
ERROR: Function failed: do_configure (see
/home/desen555/yocto/build/__tmp/work/overo-poky-linux-__gnueabi/linux-omap-khilmanpm/__3.5-r0/temp/log.do_configure.__28505
for further information)
ERROR: Logfile of failure stored in:
/home/desen555/yocto/build/__tmp/work/overo-poky-linux-__gnueabi/linux-omap-khilmanpm/__3.5-r0/temp/log.do_configure.__28505
Log data follows:
| DEBUG: Executing python function sysroot_cleansstate
| DEBUG: Python function sysroot_cleansstate finished
| DEBUG: Executing shell function do_configure
| sed: can't read
/home/desen555/yocto/build/__tmp/work/overo-poky-linux-__gnueabi/linux-omap-khilmanpm/__3.5-r0/*defconfig:
No such file or directory*
| ERROR: Function failed: do_configure (see
/home/desen555/yocto/build/__tmp/work/overo-poky-linux-__gnueabi/linux-omap-khilmanpm/__3.5-r0/temp/log.do_configure.__28505
for further information)
ERROR: Task 2
(/home/desen555/yocto/poky/__meta-dese_iisc/recipes-kernel/__linux/linux-omap-khilmanpm_3.__5.bb
<http://linux-omap-khilmanpm_3.5.bb>
<http://linux-omap-khilmanpm___3.5.bb
<http://linux-omap-khilmanpm_3.5.bb>>, do_configure) failed with
exit
code '1'
NOTE: Tasks Summary: Attempted 545 tasks of which 543 didn't
need to be
rerun and 1 failed.
Waiting for 0 running tasks to finish:
Summary: 1 task failed:
/home/desen555/yocto/poky/__meta-dese_iisc/recipes-kernel/__linux/linux-omap-khilmanpm_3.__5.bb
<http://linux-omap-khilmanpm_3.5.bb>
<http://linux-omap-khilmanpm___3.5.bb
<http://linux-omap-khilmanpm_3.5.bb>>, do_configure
Summary: There was 1 ERROR message shown, returning a non-zero
exit code.
If at all I put my defconfig file in the place it is looking
for, then
it throws other errors, so I guess that is not the right way..
What other errors ? You are on the right track. When using externalsrc,
you need to ensure the kernel is configured before the build starts,
since the actual build skips steps to not modify your source tree.
If you ensure that a full .config is in your kernel's build
directory, and that defconfig is in place, what errors do you get then ?
Also note: you can have tasks skipped by adding them to
SRCTREECOVEREDTASKS
in your recipe.
Bruce
Anybody compiled kernel as an external source in yocto..??
------------------------------__---
*Sudhangathan BS*
Ph:(+91) 9731-905-205 <tel:%28%2B91%29%209731-905-205>
------------------------------__---
_________________________________________________
yocto mailing list
[email protected] <mailto:[email protected]>
https://lists.yoctoproject.__org/listinfo/yocto
<https://lists.yoctoproject.org/listinfo/yocto>
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
