Hi Denys, With this patch applied and the updated README I can boot a Beaglebone Black (rev A6) with a default yocto image/config (I've used core-image-sato-sdk FWIW). Everything seems fine, I ran a bunch of tests on the image, except for X - it doesn't start :(. I've built with fbdev and omapfb too.
X log for fbdev: http://pastebin.com/sqNc35U0 for omapfb: http://pastebin.com/fMkzMW8U Is there anything else that needs to changed/added? I could add a xorg.conf on the image too, but then it beats the point... Cheers, Stefan On Thu, 2014-04-10 at 04:02 -0400, Denys Dmytriyenko wrote: > From: Denys Dmytriyenko <[email protected]> > > * Use fbdev video driver for xserver-xorg > * Recommend installing device tree DTB files into rootfs /boot directory > * Switch back to uImage kernel format from zImage, as U-boot was not updated > - default has changed to zImage in newer U-boot 2013.10+, but we use 2013.07 > * Correct copy/paste typo in serial console > > Signed-off-by: Denys Dmytriyenko <[email protected]> > --- > meta-yocto-bsp/conf/machine/beaglebone.conf | 10 +++++----- > 1 file changed, 5 insertions(+), 5 deletions(-) > > diff --git a/meta-yocto-bsp/conf/machine/beaglebone.conf > b/meta-yocto-bsp/conf/machine/beaglebone.conf > index f2ef0cf..4263715 100644 > --- a/meta-yocto-bsp/conf/machine/beaglebone.conf > +++ b/meta-yocto-bsp/conf/machine/beaglebone.conf > @@ -6,11 +6,10 @@ PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg" > XSERVER ?= "xserver-xorg \ > xf86-input-evdev \ > xf86-input-mouse \ > - xf86-video-omapfb \ > + xf86-video-fbdev \ > xf86-input-keyboard" > > -# Ship all kernel modules by default > -MACHINE_EXTRA_RRECOMMENDS = " kernel-modules" > +MACHINE_EXTRA_RRECOMMENDS = " kernel-modules kernel-devicetree" > > EXTRA_IMAGEDEPENDS += "u-boot" > > @@ -20,13 +19,14 @@ include conf/machine/include/tune-cortexa8.inc > IMAGE_FSTYPES += "tar.bz2 jffs2" > EXTRA_IMAGECMD_jffs2 = "-lnp " > > -SERIAL_CONSOLE = "115200 ttyO2" > +SERIAL_CONSOLE = "115200 ttyO0" > > PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto" > PREFERRED_VERSION_linux-yocto ?= "3.14%" > > -KERNEL_IMAGETYPE = "zImage" > +KERNEL_IMAGETYPE = "uImage" > KERNEL_DEVICETREE = "am335x-bone.dtb am335x-boneblack.dtb" > +KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}" > > SPL_BINARY = "MLO" > UBOOT_SUFFIX = "img" > -- > 1.9.1 > -- _______________________________________________ yocto mailing list [email protected] https://lists.yoctoproject.org/listinfo/yocto
