When using DHCP, busybox's udhcpc script will write the DNS entries that
the server returned into the resolv.conf file.
In this case, I think you'll have to "provide" resolv.conf in some other
way, there's nothing in ifup/ifdown that will modify resolv.conf based
on keywords in the interfaces file.
Mike.
On 05/02/2014 02:49 PM, Iorga, Cristian wrote:
Not really, I just wanted to get a better overview of the issue that you
are facing.
What image did you started from, if any?
*From:*Tarek El-Sherbiny [mailto:[email protected]]
*Sent:* Friday, May 2, 2014 3:31 PM
*To:* Iorga, Cristian
*Cc:* [email protected]; [email protected]
*Subject:* RE: [OE-core] DNS when using Static IP
No connman is not included. Shall I include it and try?
On 2 May 2014 13:01, "Iorga, Cristian" <[email protected]
<mailto:[email protected]>> wrote:
Hello,
What image did you start from, if any?
i.e., core-image-minimal, core-image-sato, etc…
Is connman included?
Regards,
Cristian Iorga
YP
Intel Corporation
*From:*[email protected]
<mailto:[email protected]>
[mailto:[email protected]
<mailto:[email protected]>] *On
Behalf Of *Tarek El-Sherbiny
*Sent:* Friday, May 2, 2014 2:05 PM
*To:* [email protected] <mailto:[email protected]>;
[email protected]
<mailto:[email protected]>
*Subject:* [OE-core] DNS when using Static IP
Hi.
I'm trying to set my IP config to a static address.
iface eth0 inet static
address 192.168.55.45
network 192.168.55.0
netmask 255.255.255.0
broadcast 192.168.55.255
gateway 192.168.55.1
dns-nameservers 192.168.10.2
But I don't get the DNS server address to be included in
/etc/resolv.conf
If I run in dchp mode, then the resolv.conf is updated with my DNS
address.
Is there something I'm missing here in my setup?
--
/Tarek/
--
Mike Looijmans
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
