HI,
iam trying to build yacto for riot board when ever i am giving
bitbake getting the below error i strucked in this point please guide me .
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
WARNING: Failed to fetch URL
http://downloads.sourceforge.net/e2fsprogs/e2fsprogs-1.42.8.tar.gz, attempting
MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 4, output:
Read error (Connection timed out) in headers.
Read error (Connection timed out) in headers.
ERROR: Function failed: Fetcher failure for URL:
'http://downloads.sourceforge.net/e2fsprogs/e2fsprogs-1.42.8.tar.gz'. Unable to
fetch URL from any source.
ERROR: Logfile of failure stored in:
/home/teju/fsl-arm-yocto-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/e2fsprogs/1.42.8-r0/temp/log.do_fetch.9563
ERROR: Task 1746
(/home/teju/fsl-arm-yocto-bsp/sources/poky/meta/recipes-devtools/e2fsprogs/e2fsprogs_1.42.8.bb,
do_fetch) failed with exit code '1'
WARNING: Failed to fetch URL
http://gstreamer.freedesktop.org/src/gst-plugins-good/gst-plugins-good-0.10.31.tar.bz2,
attempting MIRRORS if available
Thanks &Regards
pushpa
[email protected] | Mobile : +91 74188 49193
J-Technologies India LtdCoimbatore | Chennai | JammuA9, SIDCO Industrial
Estate, Coimbatore - 641 021
Tel : CBE : 0422 4055 555 | CHN : 044 4550 0400 | JAMMU : 9086020865
Www.JtechIndia.Com | Www.Vcare.CoAn ISO Certified Company and the unit of
IndoShell Group.
> From: [email protected]
> Subject: yocto Digest, Vol 46, Issue 109
> To: [email protected]
> Date: Wed, 30 Jul 2014 23:35:58 -0700
>
> Send yocto mailing list submissions to
> [email protected]
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://lists.yoctoproject.org/listinfo/yocto
> or, via email, send a message with subject or body 'help' to
> [email protected]
>
> You can reach the person managing the list at
> [email protected]
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of yocto digest..."
>
>
> Today's Topics:
>
> 1. [yocto-docs][PATCH v2] dev-manual: Emphasize that YP supports
> MIPS64. (Robert P. J. Day)
> 2. Re: [yocto-docs][PATH] Emphasize both 32- and 64-bit MIPS
> supported. (Khem Raj)
> 3. Re: [yocto-docs][PATCH v2] dev-manual: Emphasize that YP
> supports MIPS64. (Khem Raj)
> 4. Re: [meta-intel] Why won't my app use multiple threads under
> 'valleyisland'? (Chris Tapp)
> 5. [meta-mingw] [PATCH] binutils-cross-canadian: Remove
> nativesdk-flex dependency (Mark Hatle)
> 6. Re: timeline for "official" centos 7 support? (Rifenbark, Scott M)
> 7. Re: why does dev manual, "Supported Board Support Packages",
> mention only meta-intel? (Rifenbark, Scott M)
> 8. Re: why does dev manual, "Supported Board Support Packages",
> mention only meta-intel? (Khem Raj)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 30 Jul 2014 16:51:14 -0400 (EDT)
> From: "Robert P. J. Day" <[email protected]>
> To: Yocto discussion list <[email protected]>
> Subject: [yocto] [yocto-docs][PATCH v2] dev-manual: Emphasize that YP
> supports MIPS64.
> Message-ID: <alpine.LFD.2.11.1407301650150.31103@localhost>
> Content-Type: TEXT/PLAIN; charset=US-ASCII
>
>
> Signed-off-by: Robert P. J. Day <[email protected]>
>
> ---
>
> diff --git a/documentation/dev-manual/dev-manual-start.xml
> b/documentation/dev-manual/dev-manual-start.xml
> index 6ab93f7..37bc5a2 100644
> --- a/documentation/dev-manual/dev-manual-start.xml
> +++ b/documentation/dev-manual/dev-manual-start.xml
> @@ -36,7 +36,7 @@
> You can use the OpenEmbedded build system, which uses
> <link linkend='bitbake-term'>BitBake</link>, to develop complete
> Linux
> images and associated user-space applications for architectures based
> - on ARM, MIPS, PowerPC, x86 and x86-64.
> + on ARM, MIPS, MIPS64, PowerPC, x86 and x86-64.
> <note>
> By default, using the Yocto Project creates a Poky distribution.
> However, you can create your own distribution by providing key
>
> --
>
> ========================================================================
> Robert P. J. Day Ottawa, Ontario, CANADA
> http://crashcourse.ca
>
> Twitter: http://twitter.com/rpjday
> LinkedIn: http://ca.linkedin.com/in/rpjday
> ========================================================================
>
>
>
> ------------------------------
>
> Message: 2
> Date: Wed, 30 Jul 2014 15:05:26 -0700
> From: Khem Raj <[email protected]>
> To: "Robert P. J. Day" <[email protected]>
> Cc: Yocto discussion list <[email protected]>
> Subject: Re: [yocto] [yocto-docs][PATH] Emphasize both 32- and 64-bit
> MIPS supported.
> Message-ID:
> <camkf1srrrrsdaksgsdoorawxeio8xn-rn-6n7m1i0nxsu5g...@mail.gmail.com>
> Content-Type: text/plain; charset=UTF-8
>
> On Wed, Jul 30, 2014 at 1:48 PM, Robert P. J. Day <[email protected]>
> wrote:
> > ok, i should resubmit with "MIPS, MIPS64" then? coming up.
>
> yes please
>
>
> ------------------------------
>
> Message: 3
> Date: Wed, 30 Jul 2014 15:06:36 -0700
> From: Khem Raj <[email protected]>
> To: "Robert P. J. Day" <[email protected]>
> Cc: Yocto discussion list <[email protected]>
> Subject: Re: [yocto] [yocto-docs][PATCH v2] dev-manual: Emphasize that
> YP supports MIPS64.
> Message-ID:
> <camkf1srucs+eid5curoaah8opr9qhh0wxmmhkz6+b6hfcp6...@mail.gmail.com>
> Content-Type: text/plain; charset=UTF-8
>
> On Wed, Jul 30, 2014 at 1:51 PM, Robert P. J. Day <[email protected]>
> wrote:
> >
> > Signed-off-by: Robert P. J. Day <[email protected]>
> >
> > ---
> >
> > diff --git a/documentation/dev-manual/dev-manual-start.xml
> > b/documentation/dev-manual/dev-manual-start.xml
> > index 6ab93f7..37bc5a2 100644
> > --- a/documentation/dev-manual/dev-manual-start.xml
> > +++ b/documentation/dev-manual/dev-manual-start.xml
> > @@ -36,7 +36,7 @@
> > You can use the OpenEmbedded build system, which uses
> > <link linkend='bitbake-term'>BitBake</link>, to develop complete
> > Linux
> > images and associated user-space applications for architectures
> > based
> > - on ARM, MIPS, PowerPC, x86 and x86-64.
> > + on ARM, MIPS, MIPS64, PowerPC, x86 and x86-64.
>
> this is fine however it occurred to me that speciying PPC and PPC64
> would be good too. or powerpc64 and powerpc
>
> > <note>
> > By default, using the Yocto Project creates a Poky
> > distribution.
> > However, you can create your own distribution by providing key
> >
> > --
> >
> > ========================================================================
> > Robert P. J. Day Ottawa, Ontario, CANADA
> > http://crashcourse.ca
> >
> > Twitter: http://twitter.com/rpjday
> > LinkedIn: http://ca.linkedin.com/in/rpjday
> > ========================================================================
> >
> > --
> > _______________________________________________
> > yocto mailing list
> > [email protected]
> > https://lists.yoctoproject.org/listinfo/yocto
>
>
> ------------------------------
>
> Message: 4
> Date: Wed, 30 Jul 2014 23:14:29 +0100
> From: Chris Tapp <[email protected]>
> To: Darren Hart <[email protected]>
> Cc: [email protected], Yocto Project
> <[email protected]>
> Subject: Re: [yocto] [meta-intel] Why won't my app use multiple
> threads under 'valleyisland'?
> Message-ID: <[email protected]>
> Content-Type: text/plain; charset=us-ascii
>
>
> On 29 Jul 2014, at 16:41, Darren Hart <[email protected]> wrote:
>
> > On Thu, Jul 24, 2014 at 09:45:41PM +0100, Chris Tapp wrote:
> >> I've got a recipe for an application. This has:
> >>
> >> 1) A main thread;
> >> 2) An OpenGL ('X' / EGL) graphics rendering thread created using posix
> >> threads;
> >> 3) As many threads as required from the graphics thread for GStreamer to
> >> service various pipelines.
> >>
> >> On a Cedartrail platform this happily uses multiple cores.
> >
> > Major difference here is graphics chip, cedartrail uses EMGD binary drivers,
> > baytrail (valleyisland) uses the open source Intel i965 drivers.
> >
> > I recently (yesterday) updated meta-intel master and daisy to properly
> > support
> > video acceleration in gstreamer 1.0 - I don't know if this impacts you or
> > not.
>
> Thanks for the pointer. I'll give it a try and see if it makes a difference.
>
> > However, if I use the same recipe under a 64-bit valleyisland build (daisy)
> > it
> >> only ever uses a single core (and virtually grinds to a halt).
> >>
> >> 'top' shows CPU usage for the application never goes above 25% (J1900, so
> >> four
> >> cores available). Running four instances of 'yes' gets the total CPU usage
> >> to
> >> 100%, so all the cores are available.
> >
> > Does /proc/cpu list four cores?
>
> It does.
>
> I've also found that running the GStreamer pipeline outside of (and at the
> same time as) my application works as expected - i.e. more CPU resources are
> used and the application runs at the target loop time, so the system can
> definitely do what I want...
>
> > 'taskset' shows that the affinity mask for the application is not
> > restricting
> >> the set of available cores.
> >>
> >> Umm... Any ideas what's going on here?
> >>
> >> It looks as if GStreamer and OpenGL are fighting for access to something,
> >> but
> >> the pipelines only render to 'fakesink' and 'appsink'.
> >>
> >
> > I don't have any GL/GST development experience, so this is likely best
> > taken to
> > those respective lists.
>
> Thanks, I've already tried that and not got anything back ;-)
>
> > --
> > Darren
>
> Chris Tapp
>
> [email protected]
> www.keylevel.com
>
>
>
>
>
> ------------------------------
>
> Message: 5
> Date: Wed, 30 Jul 2014 20:08:55 -0500
> From: Mark Hatle <[email protected]>
> To: <[email protected]>
> Subject: [yocto] [meta-mingw] [PATCH] binutils-cross-canadian: Remove
> nativesdk-flex dependency
> Message-ID:
> <[email protected]>
> Content-Type: text/plain
>
> Flex does not build properly with mingw support, it also does not appear
> to be needed in order to build binutils or the other nativesdk components
> when building for mingw.
>
> Signed-off-by: Mark Hatle <[email protected]>
> ---
> recipes-devtools/binutils/binutils-cross-canadian_2.24.bbappend | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/recipes-devtools/binutils/binutils-cross-canadian_2.24.bbappend
> b/recipes-devtools/binutils/binutils-cross-canadian_2.24.bbappend
> index 7551868..026c932 100644
> --- a/recipes-devtools/binutils/binutils-cross-canadian_2.24.bbappend
> +++ b/recipes-devtools/binutils/binutils-cross-canadian_2.24.bbappend
> @@ -1,4 +1,5 @@
> EXTRA_OECONF_append_sdkmingw32 = " --disable-plugins --disable-nls"
> LDFLAGS_append_sdkmingw32 = " -Wl,-static"
>
> -DEPENDS_remove_sdkmingw32 = "nativesdk-gettext"
> \ No newline at end of file
> +DEPENDS_remove_sdkmingw32 = "nativesdk-gettext"
> +DEPENDS_remove_sdkmingw32 = "nativesdk-flex"
> --
> 1.9.3
>
>
>
> ------------------------------
>
> Message: 6
> Date: Thu, 31 Jul 2014 05:41:30 +0000
> From: "Rifenbark, Scott M" <[email protected]>
> To: "Robert P. J. Day" <[email protected]>, Yocto discussion list
> <[email protected]>
> Subject: Re: [yocto] timeline for "official" centos 7 support?
> Message-ID:
> <41dea4b02dbdef40a0f3b6d0ddb1237983fd1...@orsmsx101.amr.corp.intel.com>
>
> Content-Type: text/plain; charset="us-ascii"
>
> Just before each major release, I run a script that produces the list of
> validated distros we have tested and support. So if this is going to be a
> supported distro, it will get on the list in the manual.
>
> Scott
>
> >-----Original Message-----
> >From: [email protected] [mailto:yocto-
> >[email protected]] On Behalf Of Robert P. J. Day
> >Sent: Wednesday, July 30, 2014 12:07 PM
> >To: Yocto discussion list
> >Subject: [yocto] timeline for "official" centos 7 support?
> >
> >
> > working version of yocto dev manual currently has no mention of centos 7 in
> >the list of supported distributions -- anyone working on validating that?
> >
> >rday
> >
> >--
> >
> >=================================================================
> >=======
> >Robert P. J. Day Ottawa, Ontario, CANADA
> > http://crashcourse.ca
> >
> >Twitter: http://twitter.com/rpjday
> >LinkedIn: http://ca.linkedin.com/in/rpjday
> >=================================================================
> >=======
> >
> >--
> >_______________________________________________
> >yocto mailing list
> >[email protected]
> >https://lists.yoctoproject.org/listinfo/yocto
>
>
> ------------------------------
>
> Message: 7
> Date: Thu, 31 Jul 2014 05:50:09 +0000
> From: "Rifenbark, Scott M" <[email protected]>
> To: "Robert P. J. Day" <[email protected]>, Yocto discussion list
> <[email protected]>
> Subject: Re: [yocto] why does dev manual, "Supported Board Support
> Packages", mention only meta-intel?
> Message-ID:
> <41dea4b02dbdef40a0f3b6d0ddb1237983fd1...@orsmsx101.amr.corp.intel.com>
>
> Content-Type: text/plain; charset="us-ascii"
>
> The bold title of the bullet item should probably not be so restrictive. The
> point of the section is to show how to set up the meta-intel repository. I
> can re-write this section to indicate the wider BSP support and still use the
> main meta-intel git clone example.
>
> Scott
>
> >-----Original Message-----
> >From: [email protected] [mailto:yocto-
> >[email protected]] On Behalf Of Robert P. J. Day
> >Sent: Wednesday, July 30, 2014 12:25 PM
> >To: Yocto discussion list
> >Subject: [yocto] why does dev manual, "Supported Board Support Packages",
> >mention only meta-intel?
> >
> >
> > also from current dev manual, chapter 2, there is a bullet point entitled
> >"Supported Board Support Packages" which mentions *only* meta-intel as if its
> >the only such layer.
> >
> > that seems sort of ... incomplete.
> >
> >rday
> >
> >--
> >
> >=================================================================
> >=======
> >Robert P. J. Day Ottawa, Ontario, CANADA
> > http://crashcourse.ca
> >
> >Twitter: http://twitter.com/rpjday
> >LinkedIn: http://ca.linkedin.com/in/rpjday
> >=================================================================
> >=======
> >
> >--
> >_______________________________________________
> >yocto mailing list
> >[email protected]
> >https://lists.yoctoproject.org/listinfo/yocto
>
>
> ------------------------------
>
> Message: 8
> Date: Wed, 30 Jul 2014 23:35:25 -0700
> From: Khem Raj <[email protected]>
> To: "Rifenbark, Scott M" <[email protected]>
> Cc: Yocto discussion list <[email protected]>
> Subject: Re: [yocto] why does dev manual, "Supported Board Support
> Packages", mention only meta-intel?
> Message-ID:
> <camkf1sqypbb1-oe23zz0rpm31oxn9pz+ypddsd_j10h4h2k...@mail.gmail.com>
> Content-Type: text/plain; charset=UTF-8
>
> On Wed, Jul 30, 2014 at 10:50 PM, Rifenbark, Scott M
> <[email protected]> wrote:
> > The point of the section is to show how to set up the meta-intel repository
>
> I think it should cover the general case.
>
>
> ------------------------------
>
> --
> _______________________________________________
> yocto mailing list
> [email protected]
> https://lists.yoctoproject.org/listinfo/yocto
>
>
> End of yocto Digest, Vol 46, Issue 109
> **************************************
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
