Thanks for your patience. I was successful in building the patch as follows: __________________ --- a/configure.ac 2014-08-28 03:20:36.000000000 +0300 +++ b/configure.ac 2014-11-25 23:22:45.129711196 +0300 @@ -13,7 +13,7 @@ AG_GST_INIT dnl initialize automake -AM_INIT_AUTOMAKE([-Wno-portability 1.11 no-dist-gzip dist-xz tar-ustar]) +AM_INIT_AUTOMAKE([-Wno-portability 1.11 no-dist-gzip dist-xz tar-ustar foreign]) dnl define PACKAGE_VERSION_* variables AS_VERSION ________________________________ build proceeds past do_config but now fails at do_complie for the same module.
The last part of the error is as follows: ______________________________________________ | In file included from /home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/gstreamer1.0-plugins-hantro/1.0-r1/gst-hantro-g1-1.0/gst-libs/ext/g1/dwl/gstdwlallocator.c:31:0: | /home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/gstreamer1.0-plugins-hantro/1.0-r1/gst-hantro-g1-1.0/gst-libs/ext/g1/dwl/gstdwlallocator.h:36:28: fatal error: gstg1allocator.h: No such file or directory | #include "gstg1allocator.h" | ^ | compilation terminated. | make[5]: *** [libgstdwlallocator_1.0_la-gstdwlallocator.lo] Error 1 | make[5]: Leaving directory `/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/gstreamer1.0-plugins-hantro/1.0-r1/build/gst-libs/ext/g1/dwl' | make[4]: *** [all-recursive] Error 1 | make[4]: Leaving directory `/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/gstreamer1.0-plugins-hantro/1.0-r1/build/gst-libs/ext/g1' | make[3]: *** [all-recursive] Error 1 | make[3]: Leaving directory `/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/gstreamer1.0-plugins-hantro/1.0-r1/build/gst-libs/ext' | make[2]: *** [all-recursive] Error 1 | make[2]: Leaving directory `/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/gstreamer1.0-plugins-hantro/1.0-r1/build/gst-libs' | make[1]: *** [all-recursive] Error 1 | make[1]: Leaving directory `/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/gstreamer1.0-plugins-hantro/1.0-r1/build' | make: *** [all] Error 2 | ERROR: oe_runmake failed | WARNING: exit code 1 from a shell command. | ERROR: Function failed: do_compile (log file is located at /home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/gstreamer1.0-plugins-hantro/1.0-r1/temp/log.do_compile.3977) ERROR: Task 603 (/home/lachlan/poky/meta-atmel/recipes-multimedia/gstreamer1.0-plugins/gstreamer1.0-plugins-hantro_10.bb, do_compile) failed with exit code '1' _________________________________________________________________________________ Any ides on how to proceed? Maybe i go back to using poky 1.6.1 ? Thanks for any ideas Lachlan ----- Original Message ----- From: "Anders Darander" To:"peterengcomau...@adam.com.au" Cc:"yocto@yoctoproject.org" Sent:Tue, 25 Nov 2014 19:19:27 +0100 Subject:Re: [yocto] New error in 1.7 On 25 November 2014 17:13:17 CET, "peterengcomau...@adam.com.au" wrote: >My original problem is that the image built in 1.6.1 does not build in >1.7. Paul indicated this is probably because of the -foreign issue as >referred to in the reference manual Section 5.6.3 when upgrading. > > >What I need to do is modify my recipe to include this. I understand >once I have modified the recipe I can generate a patch against the >original. The easiest way is likely to patch configure.ac, similar to what was done in http://git.openembedded.org/openembedded-core/commit/?id=60da074fea280d8190e7439361712dcc86177f12 So you were on the right track in your earlier email. >However, I still cannot identify the original change to the recipe >required to add this item. > > >I have added to the recipe > > >EXTRA_OECONF = " 'AM_INIT_AUTOMAKE([foreign]); " > > >Is this the correct change to the recipe to ensure the config.ac file >is updated so that any non-conformance with GNU guidelines is >overlooked? No, what that line does is add some extra argument to the call to configure. AM_INIT_AUTOMAKE is a macro in configure.ac. Create the patch that you talked about in got previous email, and make sure that it applies. Then this problem will go away. Cheers, Anders -- ChargeStorm AB / eStorm -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto ---- Message sent via Adam Internet WebMail - http://www.adam.com.au/
-- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto