On 2014-12-05 05:48, [email protected] wrote:
Hello Matt,
thanks very much for your reply, I was able to create a simple patch changing
an u-boot setting as test and “bbappended” it. I just didn’t believe before
that the various u-boot
settings are “hard-coded” but they obviously are in the “<board>.h”, so
patching it seems to be the only way for changing settings from within yocto, right?
What U-Boot settings are you asking about?
*Von:*Matt Schuckmann [mailto:[email protected]]
*Gesendet:* Donnerstag, 4. Dezember 2014 18:31
*An:* Heise, Matthias; [email protected]
*Betreff:* RE: u-boot precompiled ?
Mat,
I’m fairly new to OpenEmbedded (4 months now and I still feel like a noobi but
I’m trying to give back while the pain is still fresh in my mind)
For something like u-boot it kind of depends on what your changing. If you need
to change the u-boot code and the changes are small then typically you’d create
a patch f for your
changes and then make them part of a .bbappend in your layer for the recipe.
There are examples on the net for how to create a .bbappend and reference the
patch file.
Generally your .bbappend can be as simple as:
FILESEXTRAPATHS_prepend = “:${THISDIR}/files”
SRC_URI += “files://xyzzy.patch”
Where your patches are in subdirectory of your recipe directory.
Remember that generally recipes are about how to obtain the code, build it and
package it for distribution, you can do recipes that deal with a pre-built
binary but that is
generally not the case.
Hope this helps,
Matt S.
*From:*[email protected] <mailto:[email protected]>
[mailto:[email protected]] *On Behalf Of
*[email protected]
<mailto:[email protected]>
*Sent:* Thursday, December 04, 2014 1:49 AM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [yocto] u-boot precompiled ?
Even if this is a stupid question a little advise would be nice … like “don’t
ask so stupid questions, go read this and that” or something… no time ? Should
I rather unsubscribe
from this list until I’m an expert?
*Von:*Heise, Matthias
*Gesendet:* Mittwoch, 3. Dezember 2014 15:15
*An:* '[email protected]'
*Betreff:* u-boot precompiled ?
Hi all,
I’m still trying to find out basic things about getting a system up and
running. This question is about U-Boot, is it right that for example for my
wandboard a pre-compiled *.imx
is just downloaded ?
So if I want to make settings to U-Boot I make them directly in the source,
compile it and re-direct in a recipe to take that new file as bootloader ? Or
can I make the settings
within a recipe and I just didn’t find the spot ?
Thanks for your time,
Regards
Mat
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
