On 12/11/2014 07:05 AM, Maciek Borzecki wrote:
On wto, 2014-12-09 at 10:50 -0500, Denys Dmytriyenko wrote:
On Tue, Dec 09, 2014 at 04:44:31PM +0100, Maciej Borzecki wrote:
U-boot 2014.07 in Poky expects a zImage kernel image, thus a build done with
current machien config will not be directly useable. Update machine config to
produce a zImage.
Signed-off-by: Maciej Borzecki <[email protected]>
Signed-off-by: Maciek Borzecki <[email protected]>
Acked-by: Denys Dmytriyenko <[email protected]>
Can we pick that up for master?
We really should spend the few minutes and make sure the zImage is updated
in the README as well. Since with this change, we are knowingly making
them invalid (I admit they don't work now if you can't boot the uImage,
but we shouldn't make it worse).
Bruce
This was sitting in my tree pending fixed update to U-boot 2014.10...
---
meta-yocto-bsp/conf/machine/beaglebone.conf | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/meta-yocto-bsp/conf/machine/beaglebone.conf
b/meta-yocto-bsp/conf/machine/beaglebone.conf
index a316207..fb0189d 100644
--- a/meta-yocto-bsp/conf/machine/beaglebone.conf
+++ b/meta-yocto-bsp/conf/machine/beaglebone.conf
@@ -24,7 +24,7 @@ SERIAL_CONSOLE = "115200 ttyO0"
PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto"
PREFERRED_VERSION_linux-yocto ?= "3.14%"
-KERNEL_IMAGETYPE = "uImage"
+KERNEL_IMAGETYPE = "zImage"
KERNEL_DEVICETREE = "am335x-bone.dtb am335x-boneblack.dtb"
KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
--
1.9.3
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
