On 11/08/2015 08:58, Petter Mabäcker wrote: > 2015-08-10 13:08 skrev Alex J Lennon: > >> This requires some changes to KERNEL_DEVICETREE as the dtb >> layout has changed to support overlays. This change also >> makes us ready to support kernel 4.x series >> >> Signed-off-by: Alex J Lennon <[email protected] >> <mailto:[email protected]>> >> --- >> conf/machine/include/rpi-base.inc | 22 ++++++++++------------ >> recipes-kernel/linux/linux-raspberrypi_3.18.bb | 9 +++++++-- >> 2 files changed, 17 insertions(+), 14 deletions(-) >> >> diff --git a/conf/machine/include/rpi-base.inc >> b/conf/machine/include/rpi-base.inc >> index 1dda207..8caa5ba 100644 >> --- a/conf/machine/include/rpi-base.inc >> +++ b/conf/machine/include/rpi-base.inc >> @@ -23,18 +23,16 @@ KERNEL_DEVICETREE ?= " \ >> bcm2708-rpi-b-plus.dtb \ >> bcm2709-rpi-2-b.dtb \ >> \ >> - ds1307-rtc-overlay.dtb \ >> - hifiberry-amp-overlay.dtb \ >> - hifiberry-dac-overlay.dtb \ >> - hifiberry-dacplus-overlay.dtb \ >> - hifiberry-digi-overlay.dtb \ >> - iqaudio-dac-overlay.dtb \ >> - iqaudio-dacplus-overlay.dtb \ >> - lirc-rpi-overlay.dtb \ >> - pcf8523-rtc-overlay.dtb \ >> - pps-gpio-overlay.dtb \ >> - w1-gpio-overlay.dtb \ >> - w1-gpio-pullup-overlay.dtb \ >> + overlays/hifiberry-amp-overlay.dtb \ >> + overlays/hifiberry-dac-overlay.dtb \ >> + overlays/hifiberry-dacplus-overlay.dtb \ >> + overlays/hifiberry-digi-overlay.dtb \ >> + overlays/iqaudio-dac-overlay.dtb \ >> + overlays/iqaudio-dacplus-overlay.dtb \ >> + overlays/lirc-rpi-overlay.dtb \ >> + overlays/pps-gpio-overlay.dtb \ >> + overlays/w1-gpio-overlay.dtb \ >> + overlays/w1-gpio-pullup-overlay.dtb \ >> " >> KERNEL_IMAGETYPE ?= "Image" >> >> diff --git a/recipes-kernel/linux/linux-raspberrypi_3.18.bb >> b/recipes-kernel/linux/linux-raspberrypi_3.18.bb >> index 6d8b155..18c2020 100644 >> --- a/recipes-kernel/linux/linux-raspberrypi_3.18.bb >> +++ b/recipes-kernel/linux/linux-raspberrypi_3.18.bb >> @@ -1,6 +1,11 @@ >> -LINUX_VERSION ?= "3.18.11" >> +LINUX_VERSION ?= "3.18.16" >> >> -SRCREV = "d64fa8121fca9883d6fb14ca06d2abf66496195e" >> +SRCREV = "1bb18c8f721ef674a447f3622273f2e2de7a205c" >> SRC_URI = >> "git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.18.y" >> >> require linux-raspberrypi.inc >> + >> +# Create missing out of tree 'overlays' directory prior to install step >> +do_compile_append() { >> + mkdir -p ${B}/arch/arm/boot/dts/overlays >> +} >> -- 1.9.1 >> > Hi Alex, > > At least I get problems during compile step with above change (I'm > building for rpi2). So are your sure '${B}/arch/arm/boot/dts/overlays' > isn't needed during compile? I tried with changing above from append to > prepand instead and then it worked fine for me (when building 3.18 kernel). > > (from log.do_compile, complete log can be found at: > http://www.technux.se/logs/log.do_compile.4398.fail ) > > KSYM .tmp_kallsyms1.o > KSYM .tmp_kallsyms2.o > LD vmlinux > SORTEX vmlinux > SYSMAP System.map > OBJCOPY arch/arm/boot/Image > Kernel: arch/arm/boot/Image is ready > NOTE: make -j 4 bcm2708-rpi-b.dtb > DTC arch/arm/boot/dts/bcm2708-rpi-b.dtb > NOTE: make -j 4 bcm2708-rpi-b-plus.dtb > DTC arch/arm/boot/dts/bcm2708-rpi-b-plus.dtb > NOTE: make -j 4 bcm2709-rpi-2-b.dtb > DTC arch/arm/boot/dts/bcm2709-rpi-2-b.dtb > NOTE: make -j 4 overlays/hifiberry-amp-overlay.dtb > DTC arch/arm/boot/dts/overlays/hifiberry-amp-overlay.dtb > cc1: fatal error: opening output file > arch/arm/boot/dts/overlays/.hifiberry-amp-overlay.dtb.dts.tmp: No such file > or directory > compilation terminated. > make[3]: *** [arch/arm/boot/dts/overlays/hifiberry-amp-overlay.dtb] Error 1 > make[2]: *** [overlays/hifiberry-amp-overlay.dtb] Error 2 > make[1]: *** [sub-make] Error 2 > make: *** [__sub-make] Error 2 > ERROR: oe_runmake failed > ERROR: Function failed: do_compile (log file is located at > /home/epetmab/programming/yocto/alex_test_sstate/tmp/work/raspberrypi2-poky-linux-gnueabi/linux-raspberrypi/3.18.16+git1bb18c8f721ef674a447f3622273f2e2de7a205c-r0/temp/log.do_compile.4398) > > > BR, Petter > > >
Hi Petter, Thanks for testing that out. That is indeed exactly what I was seeing before I added the directory creation. I did do the following test for both 3.18.x and 4.1.3 kernels (rpi2) bitbake -f -c cleansstate virtual/kernel bitbake -f virtual/kernel I've just re-run that again here and it works for me as-is. I thought cleansstate was causing me to build from scratch so I'm unclear as to why I'm not seeing the problem... NB. I'd also add that for preference I'd like to see the kernel build Makefile patched with whatever is in 4.1 to create that needed overlays directory but I've had a look and can't spot it. Cheers, Alex -- _______________________________________________ yocto mailing list [email protected] https://lists.yoctoproject.org/listinfo/yocto
