Martin, I tested with PACKAGECONFIG_pn-qtbase = " accessibility" and after with PACKAGECONFIG_append_pn-qtbase in the local.conf but the problem still the same.
Collected errors: * satisfy_dependencies_for: Cannot satisfy the following dependencies for packagegroup-qt5: * qtquickcontrols-plugins * qtquickcontrols * * opkg_install_cmd: Cannot install package packagegroup-qt5. ERROR: Function failed: do_rootfs ERROR: Logfile of failure stored in: /home/icchw/fsl-community-bsp/toradex_colibri_imx6/tmp/work/colibri_imx6-poky-linux-gnueabi/core-image-minimal/1.0-r0/temp/log.do_rootfs.18724 I'm trying to find what is missing or wrong. Thank you very much!. Regards Caio Pereira 2015-09-02 10:18 GMT-03:00 Martin Jansa <[email protected]>: > On Wed, Sep 02, 2015 at 10:04:19AM -0300, Caio wrote: > > I had the same dependency error. > > > > Collected errors: > > * satisfy_dependencies_for: Cannot satisfy the following dependencies > for > > packagegroup-qt5: > > * qtquickcontrols-plugins * qtquickcontrols * > > * opkg_install_cmd: Cannot install package packagegroup-qt5. > > > > ERROR: Function failed: do_rootfs > > ERROR: Logfile of failure stored in: > > > /home/icchw/fsl-community-bsp/toradex_colibri_imx6/tmp/work/colibri_imx6-poky-linux-gnueabi/core-image-minimal/1.0-r0/temp/log.do_rootfs.2872 > > ERROR: Task 7 > > (/home/icchw/fsl-community-bsp/sources/poky/meta/recipes-core/images/ > > core-image-minimal.bb, do_rootfs) failed with exit code '1' > > And fixing that by creating empty packages is the worst thing you can do.. > > qtquickcontrols is probably empty because you didn't enable right > PACKAGECONFIG options for qtbase (accessiblity), see README and > qtbase_git.bb > > > Which option is better to add Qt5 packages? Create a package group or add > > the packages in the Image recipe? > > It doesn't matter, packagegroup is better if you want to group all qt5 > related packages together and/or reuse the same packagegroup from > various images. > > > 2015-09-01 18:57 GMT-03:00 Martin Jansa <[email protected]>: > > > > > On Tue, Sep 01, 2015 at 06:05:58PM -0300, Caio wrote: > > > > I created a bbappend for qtquickcontrol with ALLOW_EMPTY_${PN} = "1" > to > > > > fix. (Thanks Sergio Prado) > > > > > > > > #cat qtquickcontrol_%.bbappend > > > > ALLOW_EMPTY_${PN} = "1" > > > > > > And what do you expect from empty package installed in your rootfs? > > > > > > If you need qtquickcontrol-plugins, then you should add > > > qtquickcontrol-plugins to RDEPENDS, installing empty package is as good > > > as not installing qtquickcontrol at all. > > > > > > > 2015-09-01 11:54 GMT-03:00 Caio <[email protected]>: > > > > > > > > > Pascal, > > > > > > > > > > You're right, was my mistake. > > > > > I updated the recipe to use RDEPENDS_${PN} , but now I'm having > problem > > > > > with dependence ( qtquickcontrols). I'm trying to fix. > > > > > > > > > > > > > > > SUMMARY = "QT5 package group" > > > > > LICENSE = "MIT" > > > > > > > > > > PR = "0" > > > > > > > > > > inherit packagegroup > > > > > > > > > > RDEPENDS_${PN} += " \ > > > > > qtbase \ > > > > > qtbase-plugins \ > > > > > qtbase-fonts \ > > > > > qtdeclarative \ > > > > > qtdeclarative-plugins \ > > > > > qtdeclarative-qmlplugins \ > > > > > qtsvg \ > > > > > qtsvg-plugins \ > > > > > qtimageformats \ > > > > > qtimageformats-plugins \ > > > > > qtmultimedia \ > > > > > qtmultimedia-plugins \ > > > > > qtmultimedia-qmlplugins \ > > > > > qtserialport \ > > > > > qtscript \ > > > > > qtgraphicaleffects-qmlplugins \ > > > > > qtconnectivity-qmlplugins \ > > > > > qtxmlpatterns \ > > > > > qtquick1 \ > > > > > qtquick1-plugins \ > > > > > qtquick1-qmlplugins \ > > > > > qtquickcontrols \ > > > > > qtquickcontrols-qmlplugins \ > > > > > qtgstreamer \ > > > > > " > > > > > > > > > > Error: > > > > > > > > > > Configuring packagegroup-gstreamer. > > > > > Configuring opkg-collateral. > > > > > Configuring poky-feed-config-opkg. > > > > > Configuring quitbattery. > > > > > Configuring psplash. > > > > > Collected errors: > > > > > * satisfy_dependencies_for: Cannot satisfy the following > dependencies > > > for > > > > > packagegroup-qt5: > > > > > * qtquickcontrols * > > > > > * opkg_install_cmd: Cannot install package packagegroup-qt5. > > > > > > > > > > ERROR: Function failed: do_rootfs > > > > > ERROR: Logfile of failure stored in: > > > > > > > > > /home/icchw/fsl-community-bsp/toradex_colibri_imx6/tmp/work/colibri_imx6-poky-linux-gnueabi/core-image-minimal/1.0-r0/temp/log.do_rootfs.3458 > > > > > ERROR: Task 7 > > > > > > (/home/icchw/fsl-community-bsp/sources/poky/meta/recipes-core/images/ > > > > > core-image-minimal.bb, do_rootfs) failed with exit code '1' > > > > > > > > > > > > > > > Thank you very much, > > > > > > > > > > Regards, > > > > > > > > > > Caio Pereira > > > > > > > > > > > > > > > 2015-09-01 11:22 GMT-03:00 Pascal Bach <[email protected]>: > > > > > > > > > >> > > > > > >> > > > > > >> > my package group > > > > >> > > > > > >> > packagegroup-qt5_0.1.bb <http://packagegroup-qt5_0.1.bb> > > > > >> > > > > > >> > SUMMARY = "QT5 package group" > > > > >> > LICENSE = "MIT" > > > > >> > > > > > >> > PR = "0" > > > > >> > > > > > >> > inherit packagegroup > > > > >> > > > > > >> > VIRTUAL_KEYBOARD ?= "maliit-framework-qt5 maliit-plugins-qt5" > > > > >> > > > > > >> I don't know if you can use IMAGE_INSTALL in a package group. > > > > >> Unitl now I have only seen RDEPENDS_${PN} used. IMAGE_INSTALL is > > > normaly > > > > >> only used in images. > > > > >> > > > > >> > IMAGE_INSTALL+ = " \ > > > > >> > dbus \ > > > > >> > qtbase \ > > > > >> > qtbase-plugins \ > > > > >> > qtbase-fonts \ > > > > >> > qtdeclarative \ > > > > >> > qtdeclarative-plugins \ > > > > >> > qtdeclarative-qmlplugins \ > > > > >> > qtmultimedia \ > > > > >> > qtmultimedia-plugins \ > > > > >> > qtmultimedia-qmlplugins \ > > > > >> > qtserialport \ > > > > >> > qtscript \ > > > > >> > qtgraphicaleffects-qmlplugins \ > > > > >> > qtconnectivity-qmlplugins \ > > > > >> > qtxmlpatterns \ > > > > >> > qtquick1 \ > > > > >> > qtquickcontrols \ > > > > >> > qtquickcontrols-qmlplugins \ > > > > >> > qtgstreamer \ > > > > >> > qtsvg \ > > > > >> > qtsvg-plugins \ > > > > >> > qtimageformats \ > > > > >> > qtimageformats-plugin \ > > > > >> > " > > > > >> > > > > > >> > RDEPENDS_${PN}= "qtquickcontrols-qmlplugins > qtdeclarative-qmlplugins > > > > >> qtdeclarative-plugins" > > > > >> > > > > > >> > > > > > >> Pascal > > > > >> > > > > >> > > > > > > > > > > > > > > > -- > > > > > ---------------------------------------------- > > > > > Caio Pereira > > > > > > > > > > > > > > > > > > > > > -- > > > > ---------------------------------------------- > > > > Caio Pereira > > > > > > > -- > > > > _______________________________________________ > > > > yocto mailing list > > > > [email protected] > > > > https://lists.yoctoproject.org/listinfo/yocto > > > > > > > > > -- > > > Martin 'JaMa' Jansa jabber: [email protected] > > > > > > > > > > > -- > > ---------------------------------------------- > > Caio Pereira > > -- > Martin 'JaMa' Jansa jabber: [email protected] > -- ---------------------------------------------- Caio Pereira
-- _______________________________________________ yocto mailing list [email protected] https://lists.yoctoproject.org/listinfo/yocto
