Hello,
Thanks for your input. After doing a loopback mount, I was
able to locate the config.txt in that first partition. I modified that
config.txt as required and it worked. But the same modification when
done in the config.txt file which I created under boot directory
didn't work. Seems that only the config.txt in the first partition is
being read during boot-up.
Thanks,
Chaitanya
On Sun, Nov 1, 2015 at 5:13 PM, Andrei Gherzan <[email protected]> wrote:
> Hi,
>
>
> On Mon, Nov 2, 2015 at 2:09 AM, Chaitanya Dhere
> <[email protected]> wrote:
>> Hello ,
>> I tried creating one config.txt. But even after that and
>> rebooting I'm unable to see a i2c-1 device under /dev.
>>
>> Yes I checked, it's not present on the board under /boot . In
>> tmp/deploy/images/raspberrypi2/bcm2835-bootfiles, I'm able to see
>> config.txt along with bcm2835-bootfiles-20150206.stamp,
>> bcm2835-bootfiles-20150206.stamp, cmdline.txt, fixup_cd.dat,
>> fixup.dat, fixup_x.dat, start_cd.elf, start.elf, and start_x.elf.
>>
>
> Can you try on master too? As well, could you please mount the sdcard
> image (loopback mount) and check the content of the first partition?
>
> ---
> Andrei
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
