On Mon, Jun 19, 2017 at 7:22 AM, Drew Moseley <drew.mose...@mender.io> wrote: > >> On Jun 19, 2017, at 1:48 AM, Trevor Woerner <twoer...@gmail.com> wrote: >> >>> If you have a serial console connected to >>> +your board, you will see the progress and a message on the console will >>> indicate when >>> +the flashing is completed. >> >> hmmm, never saw this. I have a console connected, the moment the script >> started, on the console I got: >> >> U-Boot SPL 2016.01 (Jun 19 2017 - 00:32:19) >> DRAM: 512 MiB >> CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2 >> Trying to boot from >> >> which looks right, the date+time are good. > > Did you see the proper serial output after using a smaller image?
Yes. With a smaller image (~90MB) the flash update worked. Maybe another improvement for a v2 would be for the script to look at the size of /full/path/to/UBI_IMAGE and issue a warning/error if it's too big? I think the wording of what to expect on the host and over the serial console could use some updating. Not to mention you say: "the status LED on the CHIP board will flash 30 times per second..." which doesn't seem to be the case, it looks more like the LED is toggled every 2 seconds (??), in any case, it's a lot slower than 30/sec. -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
