Hi Paul,

On Tue, Sep 26, 2017 at 7:18 AM, Andrea Galbusera <giz...@gmail.com> wrote:

> Paul,
>
> On Tue, Sep 26, 2017 at 6:33 AM, Paul Eggleton <
> paul.eggle...@linux.intel.com> wrote:
>
>> Hi Andrea,
>>
>> On Tuesday, 26 September 2017 4:33:46 AM NZDT Andrea Galbusera wrote:
>> > I'm back to this issue after the weeken break. See below the feedback
>> from
>> > your suggestions.
>> >
>> > On Thu, Sep 21, 2017 at 11:49 PM, Paul Eggleton <
>> > paul.eggle...@linux.intel.com> wrote:
>> >
>> > > On Friday, 22 September 2017 9:40:41 AM NZST Paul Eggleton wrote:
>> > > > On Friday, 22 September 2017 9:22:08 AM NZST Andrea Galbusera wrote:
>> > > > > On Thu, Sep 21, 2017 at 10:48 PM, Paul Eggleton <
>> > > > > paul.eggle...@linux.intel.com> wrote:
>> > > > > > Right, so the next step would be looking for the hash for
>> > > > > > python-native.do_populate_sysroot in conf/locked_sigs.inc
>> within the
>> > > > > > failed SDK install directory and then looking for that in both
>> the
>> > > sstate-
>> > > > > > cache directory within the failed SDK and then in the
>> sstate-cache
>> > > > > > directory of the build that built it. I suspect it may not be
>> there,
>> > > but
>> > > > > > let me know what you find.
>> > > > >
>> > > > > Good catch! In the failing SDK neither conf/locked_sigs.inc nor
>> > > > > sstate-cache do include any python-native signature or object...
>> Only
>> > > > > python3-native stuff is there. Weird! As said, SDKs from the same
>> build
>> > > > > directory, used to work since a few weeks ago. May any recent
>> change in
>> > > > > poky master have caused this while periodically upgrading without
>> > > > > regenerating the sstate-cache?
>> > > >
>> > > > No, I can't see any added references to python-native anywhere in
>> the
>> > > last few
>> > > > weeks. If you do bitbake -c clean python-native and then rebuild
>> the SDK
>> > > does
>> > > > the issue go away?
>> > >
>> > > Actually scratch that, that's not going to help. The question is
>> where is
>> > > this dependency coming from and why isn't it properly picked up such
>> > > that it gets included. bitbake -g -c populate_sdk_ext your-image
>> might be
>> > > useful in determining that.
>> > >
>> >
>> > $ bitbake core-image-base-dlms -c populate_sdk_ext -g
>> >
>> > Grepping task-depends.dot for "python-native" gives no match.
>> Surprisingly
>> > enough (at least for me) I read a different story when doing the same
>> for
>> > the image itself
>> >
>> > $ bitbake core-image-base-dlms -g
>> > $ grep python-native task-depends.dot
>> >  "python-native.do_populate_lic" [label="python-native
>> > do_populate_lic\n:2.7.13-r1.1\n/home/gizero/work/smartliving
>> /distro/repo-master/build-poky/conf/../../layers/poky/meta/r
>> ecipes-devtools/python/python[18/7956]
>> > .7.13.bb"]
>> > "python-native.do_populate_lic" -> "python-native.do_patch"
>> > "python-native.do_prepare_recipe_sysroot" [label="python-native
>> > do_prepare_recipe_sysroot\n:2.7.13-r1.1\n/home/gizero/work/s
>> martliving/distro/repo-master/build-poky/conf/../../layers/p
>> oky/meta/recipes-devtools/py
>> > thon/python-native_2.7.13.bb"]
>> > "python-native.do_prepare_recipe_sysroot" ->
>> > "openssl-native.do_populate_sysroot"
>> > "python-native.do_prepare_recipe_sysroot" ->
>> > "pkgconfig-native.do_populate_sysroot"
>> > "python-native.do_prepare_recipe_sysroot" ->
>> > "automake-native.do_populate_sysroot"
>> > "python-native.do_prepare_recipe_sysroot" ->
>> > "expat-native.do_populate_sysroot"
>> > "python-native.do_prepare_recipe_sysroot" ->
>> > "sqlite3-native.do_populate_sysroot"
>> > "python-native.do_prepare_recipe_sysroot" -> "python-native.do_fetch"
>> > "python-native.do_prepare_recipe_sysroot" ->
>> > "bzip2-native.do_populate_sysroot"
>> > "python-native.do_prepare_recipe_sysroot" ->
>> > "readline-native.do_populate_sysroot"
>> > "python-native.do_prepare_recipe_sysroot" ->
>> > "zlib-native.do_populate_sysroot"
>> > "python-native.do_prepare_recipe_sysroot" ->
>> > "autoconf-native.do_populate_sysroot"
>> > "python-native.do_prepare_recipe_sysroot" ->
>> > "gnu-config-native.do_populate_sysroot"
>> > "python-native.do_prepare_recipe_sysroot" ->
>> > "libtool-native.do_populate_sysroot"
>> > "python-native.do_rm_work_all" [label="python-native
>> > do_rm_work_all\n:2.7.13-r1.1\n/home/gizero/work/smartliving/
>> distro/repo-master/build-poky/conf/../../layers/poky/meta/re
>> cipes-devtools/python/python-native_2.7
>> > .13.bb"]
>> > "python-native.do_rm_work_all" -> "readline-native.do_rm_work"
>> > "python-native.do_rm_work_all" -> "gnu-config-native.do_rm_work"
>> > "python-native.do_rm_work_all" -> "openssl-native.do_rm_work"
>> > "python-native.do_rm_work_all" -> "automake-native.do_rm_work"
>> > "python-native.do_rm_work_all" -> "m4-native.do_rm_work"
>> > "python-native.do_rm_work_all" -> "makedepend-native.do_rm_work"
>> > "python-native.do_rm_work_all" -> "xproto-native.do_rm_work"
>> > "python-native.do_rm_work_all" -> "bzip2-native.do_rm_work"
>> > "python-native.do_rm_work_all" -> "ncurses-native.do_rm_work"
>> > "python-native.do_rm_work_all" -> "python-native.do_rm_work"
>> > "python-native.do_rm_work_all" -> "expat-native.do_rm_work"
>> > "python-native.do_rm_work_all" -> "pigz-native.do_rm_work"
>> > "python-native.do_rm_work_all" -> "libtool-native.do_rm_work"
>> > "python-native.do_rm_work_all" -> "pkgconfig-native.do_rm_work"
>> > "python-native.do_rm_work_all" -> "gettext-minimal-native.do_rm_work"
>> > "python-native.do_rm_work_all" -> "util-macros-native.do_rm_work"
>> > "python-native.do_rm_work_all" -> "quilt-native.do_rm_work"
>> > "python-native.do_rm_work_all" -> "autoconf-native.do_rm_work"
>> > "python-native.do_rm_work_all" -> "cryptodev-linux-native.do_rm_work"
>> > "python-native.do_rm_work_all" -> "xz-native.do_rm_work"
>> > "python-native.do_rm_work_all" -> "zlib-native.do_rm_work"
>> > "python-native.do_rm_work_all" -> "texinfo-dummy-native.do_rm_work"
>> > "python-native.do_rm_work_all" -> "sqlite3-native.do_rm_work"
>> > "python-native.do_compile" [label="python-native
>> > do_compile\n:2.7.13-r1.1\n/home/gizero/work/smartliving/dist
>> ro/repo-master/build-poky/conf/../../layers/poky/meta/recipe
>> s-devtools/python/
>> > python-native_2.7.13.bb"]
>> > "python-native.do_compile" -> "python-native.do_configure"
>> > "python-native.do_install" [label="python-native
>> > do_install\n:2.7.13-r1.1\n/home/gizero/work/smartliving/dist
>> ro/repo-master/build-poky/conf/../../layers/poky/meta/recipe
>> s-devtools/python/
>> > python-native_2.7.13.bb"]
>> > "python-native.do_install" -> "python-native.do_compile"
>> > "bmap-tools-native.do_rm_work_all" -> "python-native.do_rm_work"
>> > "python-native.do_build" [label="python-native
>> > do_build\n:2.7.13-r1.1\n/home/gizero/work/smartliving/distro
>> /repo-master/build-poky/conf/../../layers/poky/meta/recipes-
>> devtools/python/
>> > python-native_2.7.13.bb"]
>> > "python-native.do_build" -> "python-native.do_populate_sysroot"
>> > "python-native.do_build" -> "python-native.do_rm_work"
>> > "python-native.do_build" -> "python-native.do_populate_lic"
>> > "python-native.do_build" -> "python-native.do_rm_work_all"
>> > "python-native.do_fetch" [label="python-native
>> > do_fetch\n:2.7.13-r1.1\n/home/gizero/work/smartliving/distro
>> /repo-master/build-poky/conf/../../layers/poky/meta/recipes-
>> devtools/python/
>> > python-native_2.7.13.bb"]
>> > "python-native.do_unpack" [label="python-native
>> > do_unpack\n:2.7.13-r1.1\n/home/gizero/work/smartliving/distr
>> o/repo-master/build-poky/conf/../../layers/poky/meta/recipes
>> -devtools/python/
>> > python-native_2.7.13.bb"]
>> > "python-native.do_unpack" -> "xz-native.do_populate_sysroot"
>> > "python-native.do_unpack" -> "python-native.do_fetch"
>> > "python-native.do_patch" [label="python-native
>> > do_patch\n:2.7.13-r1.1\n/home/gizero/work/smartliving/distro
>> /repo-master/build-poky/conf/../../layers/poky/meta/recipes-
>> devtools/python/
>> > python-native_2.7.13.bb"]
>> > "python-native.do_patch" -> "python-native.do_unpack"
>> > "python-native.do_patch" -> "quilt-native.do_populate_sysroot"
>> > "core-image-base-dlms.do_build" -> "python-native.do_build"
>> > "python-native.do_configure" [label="python-native
>> > do_configure\n:2.7.13-r1.1\n/home/gizero/work/smartliving/di
>> stro/repo-master/build-poky/conf/../../layers/poky/meta/reci
>> pes-devtools/python/python-native_2.7.13.
>> > bb"]
>> > "python-native.do_configure" -> "python-native.do_patch"
>> > "python-native.do_configure" -> "python-native.do_prepare_reci
>> pe_sysroot"
>> > "python-native.do_rm_work" [label="python-native
>> > do_rm_work\n:2.7.13-r1.1\n/home/gizero/work/smartliving/dist
>> ro/repo-master/build-poky/conf/../../layers/poky/meta/recipe
>> s-devtools/python/
>> > python-native_2.7.13.bb"]
>> > "python-native.do_rm_work" -> "python-native.do_populate_sysroot"
>> > "python-native.do_rm_work" -> "python-native.do_populate_lic"
>> > "python-native.do_populate_sysroot" [label="python-native
>> > do_populate_sysroot\n:2.7.13-r1.1\n/home/gizero/work/smartli
>> ving/distro/repo-master/build-poky/conf/../../layers/poky/me
>> ta/recipes-devtools/python/python-
>> > native_2.7.13.bb"]
>> > "python-native.do_populate_sysroot" -> "python-native.do_install"
>> >
>> > As expected, on the build bot that builds successfully installable SDKs,
>> > both dependency graphs contain no mention of python-native. Time to nuke
>> > the sstate-cache from the failing one or do you have any additional
>> clue to
>> > investigate further?
>>
>> Deleting sstate-cache is very unlikely to help - these dependency
>> relationships
>> aren't stored in sstate (or at least they aren't stored there in a way
>> that
>> bitbake will take it as input for dependency graph generation).
>>
>> It looks like bmap-tools-native might be how the dependency is getting in
>> -
>> perhaps this is coming in conditionally through IMAGE_FSTYPES? For some
>> unknown reason it also doesn't get triggered when building the eSDK but
>> does
>> when restoring the image dependencies within the eSDK.
>>
>
> Good catch! This explains why the two build systems behaves differently: a
> little change in local.conf I didn't notice before... The "failing" system
> does IMAGE_FSTYPES_append = " wic", likely bringing bmap-tools-native in,
> while the "working" build bot doesn't. However, as you say, this still does
> not explain why the eSDK is missing the python-native bits. BTW, "wic" is
> in the IMAGE_FSTYPE of my usual build host since months and I'm pretty sure
> it did build many successfully installable eSDK with that option in place:
> but maybe other tasks which also depended on python-native got removed
> along the way...
> What I can do now is adding "wic" to IMAGE_FSTYPES on the other system and
> see if I get the two scenarios equally misbehaving or not. Anything else or
> different you can suggest to nail this down?
>

Just noticed this thread [1] on the list and the corresponding bug [2]. Do
you think this issue and the eSDKs with missing python-native can relate to
each other?

[1] https://lists.yoctoproject.org/pipermail/yocto/2017-September/038199.
html
[2] https://bugzilla.yoctoproject.org/show_bug.cgi?id=12148
-- 
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto

Reply via email to