On 01/29/2018 09:47 PM, kishorepasupula wrote: > > Hi, > As per my understanding I’m not using any proprietary drivers. And > Graphic recipies being used are from meta layer itself. > > Here is my complete setup. > > 1) Created a custom layer (4.9.73) for Beaglebone Black instead of > using yocto-kernel(This is the only custom layer I have created rest are > standard I.e meta, meta-poky, meta-yocto-bsp) > -Here is the recipie for custom kernel( https://pastebin.com/w4GXbY6w ) > -local.conf file ( https://pastebin.com/fp2XaxFE ) > -I have Interfaced LCD display(4D 4.3” LCD cape) to my Beaglebone > Black. > -Here is the defconfig file :(Attached to Email) > -Enabled following fields in menuconfig: > Device Driver→Graphics support > > ->Direct Rendering > →DRM Support for TI LCDC Display > Controller > →Support device tree blobs using TI > LCDC Slave binding > -Machinefile( https://pastebin.com/T4YesHx3 )
You're probably not using the correct user space DRI driver and/or xorg configuration. Maybe check out meta-ti layer to see if that works ... Thanks, Anuj > > > 2) Though build was successful. After porting “Snappy” application when > I tried to run “snappy” application on target I.e BeagleBone Blak, we > are getting error response as addressed in previous mail. > > 3)Boot log of BeagleBone black( https://pastebin.com/26FaeBvw ) > > Please let me know if you need any further information from my end. > > Regards, > kk. > > On 01/29/2018 02:48 PM, Anuj Mittal wrote: >> On 01/29/2018 01:05 PM, kishorepasupula wrote: >>> >>> Hi, >>> >>> My main objective is to run snappy player >>> (https://wiki.gnome.org/Snappy) on target machine (BeagleBone Black) so, >>> I wrote a recipe for Snappy player(snappy_1.0.bb) as below >>> >>> LICENSE = "GPLv2" >>> LIC_FILES_CHKSUM = "file://COPYING;md5=686e6cb566fd6382c9fcc7a557bf4544" >>> >>> SRCREV = "e73fabce4c397b40d490c74f6a6a0de000804f42" >>> SRC_URI = "git://git.gnome.org/snappy" >>> S = "${WORKDIR}/git" >>> >>> RDEPENDS_${PN} = "gtk+3 gstreamer1.0 glib-2.0 clutter-1.0 >>> gstreamer1.0-plugins-base libxtst clutter-gst-3.0 clutter-gtk-1.0 libx11 >>> cairo gdk-pixbuf" >>> >>> # inherit line >>> inherit pkgconfig autotools >>> >>> FILES_${PN} += "${datadir}/*" >>> Added this recipe name in local.conf >>> >>> IMAGE_INSTALL_append = " snappy" >>> The build (bitbake core-image-sato) was successful, when I ran "snappy" >>> on target(BeagleBone Black) I am getting below error response. >>> >>> sh-4.4# snappy >>> libEGL warning: DRI2: failed to authenticate >>> libEGL warning: DRI2: failed to authenticate >>> libEGL warning: DRI2: failed to authenticate >>> >>> (snappy:763): clutter-CRITICAL **: Unable to initialize clutter: Unable >>> to Initialize the clutter backend: no available drivers found. >>> >>> As per my Understanding in my recipe I have resolved all dependencies >>> for Snappy player (such as clutter, gstreamer, gtk etc.). I'm unable to >>> figure out why snappy player is throwing error? Can any one guide me on >>> this? >>> >>> PS: Also tried adding PREFERRED_PROVIDER_virtual/egl ?= "mesa" in >>> local.conf but still I'm getting the same error response. >> >> Are you using proprietary drivers? If libegl is coming from mesa, it >> will probably not work with proprietary drivers. Can you provide more >> details about your setup? Which layer(s) are you using etc. and where >> are the graphics recipes/drivers coming from? >> >> Thanks, >> Anuj >> >>> >>> Regards, >>> Kk. >>> >> -- _______________________________________________ yocto mailing list [email protected] https://lists.yoctoproject.org/listinfo/yocto
