On Tue, Nov 6, 2018 at 11:57 AM Markus W <[email protected]> wrote: > > Hi! > > I want to append the rules in the > recipe-core/udev/udev-rules-rpi/99-com.rules with the rules below from > within my own recipe. I can´t figure out how to do that. > > I have tried to add those rules as separate rules file in a recipe in > my own layer. After the build I can see that the rules file is in the > correct directory /etc/udev/rules.d (next to 99-com.rules) but the > rules didn't get applied. The groups below I have created by > inheriting the useradd class (GROUPADD_PARAM_${PN} = "-r spi; -r i2c; > -r gpio") in a different layer with a higher priority than the layer > with the rules recipe. > > Not sure why this is not working. Any suggestions? > > 90-interfaces.rules file: > > SUBSYSTEM=="input", GROUP="input", MODE="0660" > SUBSYSTEM=="i2c-dev", GROUP="i2c", MODE="0660" > SUBSYSTEM=="spidev", GROUP="spi", MODE="0660" > SUBSYSTEM=="bcm2835-gpiomem", GROUP="gpio", MODE="0660" > > SUBSYSTEM=="gpio", GROUP="gpio", MODE="0660" > SUBSYSTEM=="gpio*", PROGRAM="/bin/sh -c '\ > chown -R root:gpio /sys/class/gpio && chmod -R 770 /sys/class/gpio;\ > chown -R root:gpio /sys/devices/virtual/gpio && chmod -R 770 > /sys/devices/virtual/gpio;\ > chown -R root:gpio /sys$devpath && chmod -R 770 /sys$devpath\ > '" >
might help to post the recipe used..... > Regards, > Markus > -- > _______________________________________________ > yocto mailing list > [email protected] > https://lists.yoctoproject.org/listinfo/yocto -- _______________________________________________ yocto mailing list [email protected] https://lists.yoctoproject.org/listinfo/yocto
