Hi Max,
Yes you are right, I used the same bbappend and this resolved the issue, perfect solution… I have been struggling with this since couple of days! Many thanks for your inputs and resolution. I have tested the build for imx6ulevk as well as to our own machine, both worked well. Calibration passes correctly and also writes it to /etc/pointercal.xinput file and works perfect Thanks once again… Regards Alankar -----Original Message----- From: Max Krummenacher [mailto:max.oss...@gmail.com] Sent: 04/12/2018 1:08 AM To: Alankar Dhobale; yocto@yoctoproject.org Subject: Re: [yocto] [yocto-rocko] : fsl-community-bsp X11 build touch screen calibration issue on iMX6UL Hi > Machine: imx6ulevek > > Image: core-image-x11 > > The issue I have observed on the device is, Xorg is unable to > calibrate the touchscreen, I don't know what has changed but it is > unable to calibrate, below is the log I get on prompt > ... > ERROR: XorgPrint Calibrator does not support the supplied > --output-type > > Error: unable to apply or save configuration valuesUsing calibration > data stored in /etc/pointercal.xinput > Does not installing xf86-input-libinput help? xinput-calibrator cannot cope with that input backend. I used the following bbappend to achieve this: <http://git.toradex.com/cgit/meta-toradex-demos.git/commit/?h=rocko-next&id=664a1926af81e49396bfe2681> http://git.toradex.com/cgit/meta-toradex-demos.git/commit/?h=rocko-next&id=664a1926af81e49396bfe2681 18969ec2b8718cb Regards Max
-- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
