Hi there! This has been giving me troubles for some time so I decided I'd write the list about it. The thing is that here in the uni, we have some Epson Perfection 1650 scanners which used to run OK while I was still lost on Ubuntu, but they won't run now. That's why I decided to ask here and not on the SANE dev list.
Here's some useful info: # lsusb Bus 005 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 Bus 003 Device 006: ID 04b8:0110 Seiko Epson Corp. Perfection 1650 Bus 003 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 # sane-find-scanner [...] found USB scanner (vendor=0x04b8 [EPSON], product=0x0110 [EPSON Scanner]) at libusb:003:003 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage [...] # scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). Now this is what struck me the most - it can determine that the scanner is EPSON, but it won't run the driver. Here are some relevant lines from /etc/sane.d/epson.conf [...] # SCSI scanner: scsi EPSON # for the GT-6500: scsi "EPSON SC" usb [...] I think the last line is the one that matters. I've read some things on the net and tried out the following combination usb 0x04b8 0x0110 but again to no avail. Also, [EMAIL PROTECTED] /home/p3sho # saned -d [saned] main: starting debug mode (level 2) [saned] main: [1] bind failed: Address already in use if any of you has some insights on the issue, please share. It would be greatly appreciated. Best regards, Petar. _______________________________________________ yoper-dev mailing list [email protected] https://morpheus.pingos.org/cgi-bin/mailman/listinfo/yoper-dev
