I've just completed some extensions to the NRPN system & insert effects. Everything works quite correctly except... the effect name and part number entries immediately below the System & Insert tabs. The tabs themselves switch correctly, and the effects panel below also updates. To say this is frustrating would be an extreme understatement :(
If anyone wants to have a go at this, using the latest master version, send the following MIDI CCs to a 'bare' Yoshimi. 99 - 8 ~ insert effects 98 - 3 ~ number 4 (as displayed) 6 - 32 ~ set destination 38 - 126 ~ Master Out 99 - 8 98 - 3 6 - 64 ~ change effect 38 - 5 ~ Alienwah 1 99 - 8 98 - 3 6 - 0 ~ D/W 38 - 50 ~ value After this, sending a note through will prove that it has in fact set up properly, and if you then use the gui to select effect number 3 (or 5), then go back to 4 everything shows correctly. Grrr! There is a new function call in UI/MasterUI.fl called (surprisingly) updateeffects. P.S. I seem to remember someone struggling with this general area a very long time ago - before the fork. -- Will J Godfrey http://www.musically.me.uk Say you have a poem and I have a tune. Exchange them and we can both have a poem, a tune, and a song. ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Yoshimi-devel mailing list Yoshimi-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/yoshimi-devel
