OK, in the current master we're there now :) You can set a control code of your preference in Settings->CC, but some obvious ones are blocked (with a suitable message). The same now applies to Bank MSB/LSB and to Extended Program Change.
Default for Bank Root Change is 115, and for Extended program Change it's 110. There are some GUI issues I haven't been able to sort out yet: You have to use the spinner arrows, not direct number entry. In Settings->Bank root dirs: The current root dir is not updated (although it is in the instrument window). It is correctly set however, and quitting then restarting yoshi puts everything right. Activation/deactivation of buttons isn't quite right. However, it does work and I was able to successfully add a bank root control change in a couple of Rosegarden files and they behaved perfectly :) -- Will J Godfrey http://www.musically.me.uk Say you have a poem and I have a tune. Exchange them and we can both have a poem, a tune, and a song. ------------------------------------------------------------------------------ Dive into the World of Parallel Programming! The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net _______________________________________________ yoshimi-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/yoshimi-user
