Hello,
On Tue, Apr 12, 2011 at 11:39 PM, Pavel Machek <pa...@ucw.cz> wrote:
> Hi!
>
>> > I cculd not get serial port to work in recent kernels (2.6.35 was
>> > oldest I tried). I know they are little used but still very useful for
>> > debugging.
>> >
>> > Is there some special config that needs to be done?
>> > Pavel
>>
>> I have output on ttyS0 using the Sharp cable, never had issues.
>> Remember that bootloader is 9600n8 while kernels are usually 115200n8.
>
> Ok, I know what is going on. I need both PXA_SERIAL and 8250... and
> these two don't go well together.
>
> I tried:
>
> CONFIG_SERIAL_8250=y
> # CONFIG_SERIAL_8250_CONSOLE is not set
> CONFIG_SERIAL_8250_CS=y
> CONFIG_SERIAL_8250_NR_UARTS=1
> CONFIG_SERIAL_8250_RUNTIME_UARTS=0
> # CONFIG_SERIAL_8250_EXTENDED is not set
>
> #
> # Non-8250 serial port support
> #
> # CONFIG_SERIAL_MAX3100 is not set
> # CONFIG_SERIAL_MAX3107 is not set
> CONFIG_SERIAL_PXA=y
> CONFIG_SERIAL_PXA_CONSOLE=y
> CONFIG_SERIAL_CORE=y
> CONFIG_SERIAL_CORE_CONSOLE=y
>
> (BTW should 8250_RUNTIME_UARTS be called "boottime uarts"? That's what
> help says).
>
> ...but no luck. As soon as I enable 8250, pxa serials stop working
> :-(.
Please try attached patch (then PXA consoles become ttySA0-3)
--
With best wishes
Dmitry
From a325ef37aae1c155672f1502bc9864c0ee87cbd6 Mon Sep 17 00:00:00 2001
From: Dmitry Eremin-Solenikov <dbarysh...@gmail.com>
Date: Tue, 4 Jan 2011 23:33:44 +0300
Subject: [PATCH] pxa: rename serials to reuse ttySA naming
Signed-off-by: Dmitry Eremin-Solenikov <dbarysh...@gmail.com>
---
drivers/tty/serial/pxa.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index 1102a39..14fb566 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -692,7 +692,7 @@ serial_pxa_console_setup(struct console *co, char *options)
}
static struct console serial_pxa_console = {
- .name = "ttyS",
+ .name = "ttySA",
.write = serial_pxa_console_write,
.device = uart_console_device,
.setup = serial_pxa_console_setup,
@@ -729,8 +729,8 @@ struct uart_ops serial_pxa_pops = {
static struct uart_driver serial_pxa_reg = {
.owner = THIS_MODULE,
.driver_name = "PXA serial",
- .dev_name = "ttyS",
- .major = TTY_MAJOR,
+ .dev_name = "ttySA",
+ .major = 204,
.minor = 64,
.nr = 4,
.cons = PXA_CONSOLE,
--
1.7.4.1
_______________________________________________
Zaurus-devel mailing list
Zaurus-devel@lists.linuxtogo.org
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/zaurus-devel
