On Tue, May 3, 2011 at 10:48 AM, Dmitry Eremin-Solenikov <dbarysh...@gmail.com> wrote: > On 5/3/11, Andrea Adami <andrea.ad...@gmail.com> wrote: >> Hi, >> >> I do boot spitz very seldom and lately I've seen strange failures when >> booting from CF card on spitz. >> For other Zaurus c7x0 and poodle no issues. >> >> Log of two failures is here: http://paste.debian.net/115815/ > > Please try booting w/o 'quiet' kernel parameter and with 'debug' parameter > enabled.
Sure, I'll take full logs (the first one should already be with debug). I forgot to say that I boot those kernel from kexecboot. I'm lead to think the issue is originated by the 'random' ordering done by new ATA driver, as if the comandline would point to /dev/sda1 and the target kernel thinks the device is /sdb1 FWIW kexecboot kernels boots much more rapidly, having no modules, so maybe this is a pure timing/detection issue. I'll take more verbose logs. > >> FIW when booted from SD card the ATA peripherals are detected just >> fine. http://paste.debian.net/115817/ >> >> I think to remember I've read about driver bugs in 2.6.38 and I hope >> those are solved in 2.6.39. Will see soon. > > -- > With best wishes > Dmitry TIA Andrea > > _______________________________________________ > Zaurus-devel mailing list > Zaurus-devel@lists.linuxtogo.org > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/zaurus-devel > _______________________________________________ Zaurus-devel mailing list Zaurus-devel@lists.linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/zaurus-devel
