Am Samstag, den 27.08.2011, 11:10 +0200 schrieb Holger Bach: > Hi Andrea, > > here is what I found out at this time: > > You told me already, that the order of bootscripts has to be changed to > avoid the kernel panic. I set the mountall.sh directly before udev. > Also i set devpts at the first position in /etc/rcS.d/ to avoid the > message, that mount point /dev/pts/ does not exist. > > I got the same massage with /dev/shm/ and /proc/bus/usb/. Anyway after > boot the directorys exist. > > I got an fatal error because /lib/mobules/2.6.39.2/modules.dep.temp was > read only (therefore I got many undefined symbols errors while loading > kernel modules), so i added a new bootparam "rw" in /boot/boot.cfg. But > it istn`t needed any more, maybe because the > file /lib/mobules/2.6.39.2/modules.dep is cenerated with the right > content. > The script /etc/udev/scripts/opie-pcmcia.sh runs often during > bootprocess, before opie has been started. Until opie is running every > instance of the script will be killed automaticly after maybe a minute. > Therefore the bootprocess is very very slow. I patched the script like > that: > > < /usr/bin/qcop QPE/Card stabChanged\(\) > --- > > if /usr/bin/pgrep qpe &>/dev/null; then > > /usr/bin/qcop QPE/Card stabChanged\(\) > > fi > > > I think I find out a better way to solve this and the swap problem by changing the content of /etc/udev/rules.d/opie-pcmcia.rules like this:
SUBSYSTEM=="pcmcia", ACTION=="add", PROGRAM="/usr/bin/pgrep qpe", RESULT!="0", RUN+="/etc/udev/scripts/opie-pcmcia.sh" SUBSYSTEM=="pcmcia", ACTION=="remove", PROGRAM="/usr/bin/pgrep qpe", RESULT!="0", RUN+="/etc/udev/scripts/opie-pcmcia.sh" Additionaly an ran depmode -a by hand one time. Now these are the only differeces between my local intallation and the original angström. Holger > > /var/lib/alsa/asound.state is not installed in filesystem. Maybee this > is the reason why sound does not work. > > The battery driver seems not to work (don`t know which module is needed) > the battery icon i always a 0% an says External power is disconnected. > Doesn`t matter if it is or not. It seems that the zaurus will get into > suspend because he thinks the battery is void. Afer a few minutes > running the Zaurus tries to get in suspend. But it fails with this > output: > PM: Syncing filesystems ... done. > Freezing user space processes ... > Freezing of tasks failed after 20.01 seconds (1 tasks refusing to > freeze, wq_busy=0): > apmd D c02f3560 0 860 1 0x00080001 > [<c02f3560>] (schedule+0x1ac/0x40c) from [<c02f3f6c>] > (__mutex_lock_slowpath+0x64/0x98) > [<c02f3f6c>] (__mutex_lock_slowpath+0x64/0x98) from [<c01ffc38>] > (apm_ioctl+0x38/0x1e0) > [<c01ffc38>] (apm_ioctl+0x38/0x1e0) from [<c00c5ef0>] (do_vfs_ioctl > +0x84/0x530) > [<c00c5ef0>] (do_vfs_ioctl+0x84/0x530) from [<c00c63d4>] (sys_ioctl > +0x38/0x60) > [<c00c63d4>] (sys_ioctl+0x38/0x60) from [<c0039f60>] (ret_fast_syscall > +0x0/0x2c) > > Restarting tasks ... done. > > This happens frequently after a few minutes. > > The keymap is wrong. Most seems to work, but the "FN"-key won`t > > > If you don`t have the time to solve this problems I`d like to help you, > if you could give me some hints, because I´m not very experienced in > such things. > > Thank you > > Holger > > > _______________________________________________ > Zaurus-devel mailing list > Zaurus-devel@lists.linuxtogo.org > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/zaurus-devel _______________________________________________ Zaurus-devel mailing list Zaurus-devel@lists.linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/zaurus-devel
