I have been trying to get usb networking up and running on my poodle using a new 3.2.9 kernel build. The modules load, but lsusb shows nothing on the far end.
I am running with the following kernel configs for debugging: CONFIG_USB_GADGET=m CONFIG_USB_GADGET_DEBUG=y CONFIG_USB_GADGET_DEBUG_FILES=y CONFIG_USB_GADGET_DEBUG_FS=y CONFIG_USB_GADGET_VBUS_DRAW=2 CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 # CONFIG_USB_FUSB300 is not set CONFIG_USB_PXA25X=m # CONFIG_USB_PXA25X_SMALL is not set # CONFIG_USB_R8A66597 is not set # CONFIG_USB_M66592 is not set # CONFIG_USB_NET2272 is not set CONFIG_USB_ZERO=m # CONFIG_USB_AUDIO is not set CONFIG_USB_ETH=m CONFIG_USB_ETH_RNDIS=y CONFIG_USB_ETH_EEM=y # CONFIG_USB_G_NCM is not set CONFIG_USB_GADGETFS=m # CONFIG_USB_FUNCTIONFS is not set CONFIG_USB_FILE_STORAGE=m # CONFIG_USB_FILE_STORAGE_TEST is not set CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set CONFIG_USB_CDC_COMPOSITE=m CONFIG_USB_G_ACM_MS=m CONFIG_USB_G_MULTI=m CONFIG_USB_G_MULTI_RNDIS=y CONFIG_USB_G_MULTI_CDC=y CONFIG_USB_G_HID=m # CONFIG_USB_G_DBGP is not set here are the relevant messages I have so far: dmesg: udc pxa25x-udc: registering UDC driver [g_ether] g_ether gadget: using random self ethernet address g_ether gadget: using random host ethernet address usb0: MAC 1e:53:03:50:23:67 usb0: HOST MAC 9a:cf:ce:ff:8c:54 g_ether gadget: adding config #2 'RNDIS'/bf2a4b44 g_ether gadget: adding 'rndis'/c1450a80 to config 'RNDIS'/bf2a4b44 rndis_register: configNr = 0 rndis_set_param_medium: 0 0 g_ether gadget: RNDIS: full speed IN/ep1in-bulk OUT/ep2out-bulk NOTIFY/ep6in-bulk g_ether gadget: cfg 2/bf2a4b44 speeds: full/low g_ether gadget: interface 0 = rndis/c1450a80 g_ether gadget: interface 1 = rndis/c1450a80 g_ether gadget: adding config #1 'CDC Ethernet (EEM)'/bf2a4aa8 g_ether gadget: adding 'cdc_eem'/c1450c20 to config 'CDC Ethernet (EEM)'/bf2a4aa8 g_ether gadget: CDC Ethernet (EEM): full speed IN/ep1in-bulk OUT/ep2out-bulk g_ether gadget: cfg 1/bf2a4aa8 speeds: full/low g_ether gadget: interface 0 = cdc_eem/c1450c20 g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 g_ether gadget: g_ether ready udc: registered gadget driver 'g_ether' udc: inactive udc: EP0_IDLE, uicr FF.FF, usir 00.00, ufnr 40.00 udc: udccr A0 = rem srm udc: ep0 driver 'g_ether' udc: udccs0 EP0_IDLE 00 = udc: ep0 IN 0/0, OUT 0/0 root@poodle:/sys/kernel/debug# cat pxa25x_udc PXA 25x USB Device Controller driver pxa25x_udc version: 30-June-2007(pio) Gadget driver: g_ether Host disconnected uicr FF.FF, usir 00.00, ufnr 40.00 udccr A0 = rem srm udccs0 00 = root@poodle:/sys/kernel/debug# cat /proc/driver/r rndis-000 rtc root@poodle:/sys/kernel/debug# cat /proc/driver/rndis-000 Config Nr. 0 used : y state : RNDIS_UNINITIALIZED medium : 0x00000000 speed : 0 cable : disconnected vendor ID : 0x00000000 vendor : (null) -- Henry von Tresckow (hvontres) _______________________________________________ Zaurus-devel mailing list Zaurus-devel@lists.linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/zaurus-devel
