C.S: wrote:
> Hello zd1211 community,
> 
> my first steps on the zd1211rw were pretty bad.
> showing dmesg at reboot shows why:
> 
> usb 1-4: device descriptor read/64, error -110
> usb 1-4: device descriptor read/64, error -110
> usb 1-4: new full speed USB device using ohci_hcd and address 3
> usb 1-4: device descriptor read/64, error -110
> usb 1-4: device descriptor read/64, error -110
> usb 1-4: new full speed USB device using ohci_hcd and address 4
> usb 1-4: device not accepting address 4, error -110
> usb 1-4: new full speed USB device using ohci_hcd and address 5
> usb 1-4: device not accepting address 5, error -110
> usb 2-4: new full speed USB device using ohci_hcd and address 2
> usb 2-4: new device found, idVendor=05a9, idProduct=a518
> usb 2-4: new device strings: Mfr=1, Product=2, SerialNumber=0
> usb 2-4: Product: USB Camera
> usb 2-4: Manufacturer: OmniVision Technologies, Inc.
> usb 2-4: configuration #1 chosen from 1 choice

This is not related to zd1211rw, the driver was never activated since 
the computer couldn't even identify the device. You will almost 
certainly have the same problem with the vendor driver.

> usb 1-4: request_fw_file() fw name zd1211/zd1211_ub
> usb 1-4: firmware device id 0x4330 and actual device id 0x4810 differ,
> continuing anyway
> usb 1-4: request_fw_file() fw name zd1211/zd1211_uphr
> firmware_loading_store: unexpected value (0)
> usb 1-4: Could not load firmware file zd1211/zd1211_uphr. Error number -2
> zd1211rw 1-4:1.0: couldn't load firmware. Error number -2
> usb 1-4: reset full speed USB device using ohci_hcd and address 6
> zd1211rw: probe of 1-4:1.0 failed with error -2
> usbcore: registered new driver zd1211rw
> zd1211rw initialized

Did you install the firmware distribution?

Thanks,
Daniel


_______________________________________________
Zd1211-devs mailing list - http://zd1211.ath.cx/
Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs

Reply via email to