This works fairly well, by compiling the USB ID into the ZD1211B part of
the ids.  I've tested it on WEP only. Ubuntu 7.04

I made the specific module, then copied the .ko file into the correct
place for other modules.  I did a depmod -a, and now the module gets 
inserted as the machine boots.

I have some problems:
- sometimes the device will not start.  I have to reboot, and restart
the card under Windows, then reboot again.
sudo ifup eth2 gives no device existing in this case.  rmmod and
modprobe do not help

- there is a kernel taint message.  I am not sure what that means.
[   22.092000] zd1211rw: no version for "struct_module" found: kernel

lsusb listing:
Bus 003 Device 002: ID 0b05:171b ASUSTek Computer, Inc. 
Bus 003 Device 001: ID 0000:0000  
Bus 002 Device 001: ID 0000:0000  
Bus 001 Device 002: ID 046d:c016 Logitech, Inc. M-UV69a Optical Wheel
Bus 001 Device 001: ID 0000:0000 

[   22.676000] zd1211rw 3-6:1.0: zd1211b chip 0b05:171b v4802 high
00-18-f3 AL2230_RF pa0 g---
[ 8642.008000] zd1211rw 3-6:1.0: zd_chip_control_leds error -110

This email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
Zd1211-devs mailing list -

Reply via email to