I am trying to get roaming to work with the zd1211rw driver included in 
Linux The hardware platform is ARM (Atmel AT91RM9200).

Initial association with an access point works perfectly every time.

When roaming to a new access point it never reassociates, so my ping 
session just stops.

To get my WLAN session active again, I have to go through the following 

1) "ifconfig eth1 down"

2) "rmmod zd1211rw"

3) "insmod /lib/modules/zd1211rw"

4) "ifconfig eth1 up"

5) "iwconfig eth1 essid tp5600test"

Immediately association succeeds and I get the following message:

"SoftMAC: Open Authentication completed with 00:14:6c:f5:b2:e4"

The problem can be easily reproduced by changing channels (by at least 2 
channels to avoid channel overlap) on your accesspoint while the Linux 
system is associated with it.

Why does the WLAN not roam automatically, without having to reinitialize 

Any help would be appreciated.

Thanks and best regards

Tom Hunter

ERG Transit Systems
247 Balcatta Road Balcatta WA 6021 Australia
Tel: + 61 8 9273 1216 Fax: +61 8 9273 1570
Email: [EMAIL PROTECTED] Website: www.erggroup.com

This email is confidential. If you are not the intended recipient you must 
not disclose or use the information contained in it. If you have received 
this email in error please notify us immediately by return email and 
delete this email and any attachments. ERG is not responsible for any 
changes made to this email or any attachments, other than those made by 
ERG, or for the effect of the changes on the meaning of the email or any 
attachments. ERG accepts no liability for any damage caused by this email 
or any attachments due to viruses, interference, interception, corruption 
or unauthorised access. 
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
Zd1211-devs mailing list - http://zd1211.wiki.sourceforge.net/
Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs

Reply via email to