> It is as it says, can't load firmware. If you had not
> used this USB nic
> on a machine before, it is likely you did not have them
> installed.
> They should be under /lib/firmware/zd1211 . In whatever
> mode,
> the driver still needs the firmware.
> 
> Mark Ryden wrote:
> > Hello,
> > 
> > I have build and booted the last linux
> wireless-netx-2.6 tree:
> >     
> >     
> > (
> git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6.git)
> > 
> > This tree includes the ad-hoc patch for zd1211rw.
> > 
> > See:
> >
> http://marc.info/?l=linux-wireless&m=121514338914960&w=2
> > 
> > I tried to run these two actions:
> > (I must say that I did not tried this USB nic with
> other modes before on this
> > machine):
> > 
> > iwconfig wlan0 mode ad-hoc
> > ifconfig wlan0 up
> > 
> > I get:
> > SIOCSIFFLAGS: Connection timed out
> > 
> > in in the kernel log I get:
> > Jul 10 15:40:53 kernel: usb 1-4: firmware version
> 0x4330 and device
> > bootcode version 0x4810 differ
> > Jul 10 15:40:54 kernel: usb 1-4: USB control request
> for firmware
> > upload failed. Error number -110
> > Jul 10 15:40:54 kernel: zd1211rw 1-4:1.0: couldn't
> load firmware.
> > Error number -110
> > 
> > What should I do ? is it has to do with some firmware
> mismatch ?
> > Any ideas?
> > 
> > lsusb -v shows:
> > Bus 001 Device 003: ID 0ace:1211 ZyDAS 802.11b/g USB2
> WiFi
> > Device Descriptor:
> >   bLength                18
> >   bDescriptorType         1
> >   bcdUSB               2.00
> >   bDeviceClass          255 Vendor Specific Class
> >   bDeviceSubClass       255 Vendor Specific Subclass
> >   bDeviceProtocol       255 Vendor Specific Protocol
> >   bMaxPacketSize0        64
> >   idVendor           0x0ace ZyDAS
> >   idProduct          0x1211 802.11b/g USB2 WiFi
> >   bcdDevice           48.10
> >   iManufacturer          16
> >   iProduct               32
> >   iSerial                 0
> >   bNumConfigurations      1
> >   Configuration Descriptor:
> >     bLength                 9
> >     bDescriptorType         2
> >     wTotalLength           46
> >     bNumInterfaces          1
> >     bConfigurationValue     1
> >     iConfiguration          0
> >     bmAttributes         0x80
> >       (Bus Powered)
> >     MaxPower              500mA
> >     Interface Descriptor:
> >       bLength                 9
> > ...
> > 
> > Regards,
> > Mark Ryden



      __________________________________________________________
Not happy with your email address?.
Get the one you really want - millions of new email addresses available now at 
Yahoo! http://uk.docs.yahoo.com/ymail/new.html


-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
Zd1211-devs mailing list - http://zd1211.wiki.sourceforge.net/
Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs

Reply via email to