>usb 1-1.1: request_fw_file() fw name zd1211/zd1211b_ub
>usb 1-1.1: upload_firmware() firmware device id 0x4810 is equal to the
actual device id
>usb 1-1.1: request_fw_file() fw name zd1211/zd1211b_uphr
>usb 1-1.1: upload_code() transfer size 4096
>usb 1-1.1: upload_code() transfer size 1024
>usb 1-1.1: upload_code() firmware confirm return value 0x01
When you plug the dongle in at the first time,the firmware files get
uploaded in the correct way(ref: first section of dmesg log). It errors out
when you do an 'ifconfig' subsequently. My firmware files are located in
/lib/firmware/zd1211/.
thanks for the reply.
Sundar
On Tue, Oct 7, 2008 at 3:02 PM, Hin-Tak Leung
<[EMAIL PROTECTED]>wrote:
> --- On Tue, 7/10/08, Sundar Visvanathan <[EMAIL PROTECTED]> wrote:
> <snipped>
> > usb 1-1.1: USB control request for firmware upload failed.
> > Error number -110
> >
> > usb 1-1.1: Could not upload firmware code uph. Error number
> > -110
> > zd1211rw 1-1.1:1.0: couldn't load firmware. Error
> > number -110
>
> firmware upload failed. check your firmware files?
>
>
>
>
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Zd1211-devs mailing list - http://zd1211.wiki.sourceforge.net/
Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs
