I've had an issue with the wlan device ever since i bought it. Essentially, it never works on startup. Every time i boot my machine i have to replug the device 10's of times to get the firmware to load. When it starts working it is 98% of the time very stable. This has been a low priority issue for me because the machine was on 24/7 but now that i would like to hibernate the machine this has become a showstopper.
Any ideas? -michael # lsusb Bus 005 Device 005: ID 0a91:3801 Globlink Technology, Inc. Bus 005 Device 004: ID 05ac:0221 Apple Computer, Inc. Bus 005 Device 002: ID 05ac:1006 Apple Computer, Inc. Hub in Apple Aluminum Keyboard Bus 005 Device 001: ID 0000:0000 Bus 004 Device 002: ID 07b8:6001 D-Link Corp. <---- this one Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 Ubuntu 8.04 - with default drivers # uname -a Linux shuttle 2.6.24-19-generic #1 SMP Wed Aug 20 22:56:21 UTC 2008 i686 GNU/Linux # dmesg showing replugging till it works [ 1217.082368] zd1211rw 5-8:1.0: eth1 [ 1217.125934] usb 5-8: USB control request for firmware upload failed. Error number -32 [ 1217.125944] usb 5-8: Could not upload firmware code uph. Error number -32 [ 1217.125969] zd1211rw 5-8:1.0: couldn't load firmware. Error number -32 [ 1218.037702] usb 5-8: USB disconnect, address 61 [ 1218.998173] usb 5-8: new high speed USB device using ehci_hcd and address 62 [ 1219.139053] usb 5-8: configuration #1 chosen from 1 choice [ 1219.261521] usb 5-8: reset high speed USB device using ehci_hcd and address 62 [ 1219.621532] zd1211rw 5-8:1.0: eth1 [ 1219.981026] usb 5-8: USB disconnect, address 62 [ 1220.929423] usb 5-8: new high speed USB device using ehci_hcd and address 63 [ 1221.081754] usb 5-8: configuration #1 chosen from 1 choice [ 1221.204749] usb 5-8: reset high speed USB device using ehci_hcd and address 63 [ 1221.343933] zd1211rw 5-8:1.0: eth1 [ 1221.835076] usb 5-8: USB control request for firmware upload failed. Error number -32 [ 1221.835086] usb 5-8: Could not upload firmware code uph. Error number -32 [ 1221.835113] zd1211rw 5-8:1.0: couldn't load firmware. Error number -32 [ 1222.358473] usb 5-8: USB disconnect, address 63 [ 1223.343485] usb 5-8: new high speed USB device using ehci_hcd and address 64 [ 1223.917271] usb 5-8: string descriptor 0 read error: -71 [ 1223.918015] usb 5-8: string descriptor 0 read error: -71 [ 1223.918171] usb 5-8: configuration #1 chosen from 1 choice [ 1223.918557] usb 5-8: can't set config #1, error -71 [ 1223.918583] usb 5-8: USB disconnect, address 64 [ 1224.831829] usb 5-8: new high speed USB device using ehci_hcd and address 65 [ 1224.976385] usb 5-8: configuration #1 chosen from 1 choice [ 1225.095187] usb 5-8: reset high speed USB device using ehci_hcd and address 65 [ 1225.170306] usb 5-8: read over firmware interface failed: -19 [ 1225.170508] usb 5-8: USB disconnect, address 65 [ 1226.024891] usb 5-8: new high speed USB device using ehci_hcd and address 66 [ 1226.906729] usb 5-8: new high speed USB device using ehci_hcd and address 67 [ 1227.051241] usb 5-8: configuration #1 chosen from 1 choice [ 1227.174075] usb 5-8: reset high speed USB device using ehci_hcd and address 67 [ 1227.242690] usb 5-8: read over firmware interface failed: -19 [ 1227.242890] usb 5-8: USB disconnect, address 67 [ 1228.115752] usb 5-8: new high speed USB device using ehci_hcd and address 68 [ 1228.268450] usb 5-8: configuration #1 chosen from 1 choice [ 1228.387085] usb 5-8: reset high speed USB device using ehci_hcd and address 68 [ 1228.538237] zd1211rw 5-8:1.0: eth1 [ 1229.432943] usb 5-8: USB control request for firmware upload failed. Error number -32 [ 1229.432952] usb 5-8: Could not upload firmware code uph. Error number -32 [ 1229.432979] zd1211rw 5-8:1.0: couldn't load firmware. Error number -32 [ 1231.484994] usb 5-8: USB control request for firmware upload failed. Error number -32 [ 1231.485003] usb 5-8: Could not upload firmware code uph. Error number -32 [ 1231.485030] zd1211rw 5-8:1.0: couldn't load firmware. Error number -32 [ 1233.687160] usb 5-8: USB disconnect, address 68 [ 1234.751431] usb 5-8: new high speed USB device using ehci_hcd and address 69 [ 1235.087482] usb 5-8: configuration #1 chosen from 1 choice [ 1235.210472] usb 5-8: reset high speed USB device using ehci_hcd and address 69 [ 1235.266477] usb 5-8: read over firmware interface failed: -19 [ 1235.266669] usb 5-8: USB disconnect, address 69 [ 1236.275690] usb 5-8: new high speed USB device using ehci_hcd and address 70 [ 1236.408302] usb 5-8: configuration #1 chosen from 1 choice [ 1236.523095] usb 5-8: reset high speed USB device using ehci_hcd and address 70 [ 1237.041796] usb 5-8: device not accepting address 70, error -71 [ 1237.097966] usb 5-8: read over firmware interface failed: -19 [ 1237.098159] usb 5-8: USB disconnect, address 70 [ 1237.592444] usb 5-8: new high speed USB device using ehci_hcd and address 71 [ 1237.725002] usb 5-8: configuration #1 chosen from 1 choice [ 1237.785492] ehci_hcd 0000:00:1d.7: port 8 reset error -110 [ 1237.785503] hub 5-0:1.0: hub_port_status failed (err = -32) [ 1237.987567] usb 5-8: read over firmware interface failed: -19 [ 1237.987756] usb 5-8: USB disconnect, address 71 [ 1238.753592] usb 5-8: new high speed USB device using ehci_hcd and address 72 [ 1238.886117] usb 5-8: configuration #1 chosen from 1 choice [ 1239.009061] usb 5-8: reset high speed USB device using ehci_hcd and address 72 [ 1239.144176] zd1211rw 5-8:1.0: eth1 [ 1239.187600] usb 5-8: USB control request for firmware upload failed. Error number -32 [ 1239.187610] usb 5-8: Could not upload firmware code uph. Error number -32 [ 1239.187636] zd1211rw 5-8:1.0: couldn't load firmware. Error number -32 [ 1239.428859] usb 5-8: USB disconnect, address 72 [ 1240.644950] usb 5-8: new high speed USB device using ehci_hcd and address 73 [ 1240.777566] usb 5-8: configuration #1 chosen from 1 choice [ 1240.896337] usb 5-8: reset high speed USB device using ehci_hcd and address 73 [ 1240.964990] usb 5-8: read over firmware interface failed: -19 [ 1240.965190] usb 5-8: USB disconnect, address 73 [ 1241.973683] usb 5-8: new high speed USB device using ehci_hcd and address 74 [ 1242.508355] usb 5-8: device not accepting address 74, error -71 [ 1243.102907] usb 5-8: new high speed USB device using ehci_hcd and address 76 [ 1244.144343] usb 5-8: new high speed USB device using ehci_hcd and address 77 [ 1245.074059] usb 5-8: new high speed USB device using ehci_hcd and address 78 [ 1246.095544] usb 5-8: new high speed USB device using ehci_hcd and address 79 [ 1247.089108] usb 5-8: new high speed USB device using ehci_hcd and address 80 [ 1248.086660] usb 5-8: new high speed USB device using ehci_hcd and address 81 [ 1249.040306] usb 5-8: new high speed USB device using ehci_hcd and address 82 [ 1250.117660] usb 5-8: new high speed USB device using ehci_hcd and address 83 [ 1250.640366] usb 5-8: device not accepting address 83, error -71 [ 1251.127180] usb 5-8: new high speed USB device using ehci_hcd and address 85 [ 1251.263691] usb 5-8: configuration #1 chosen from 1 choice [ 1251.386537] usb 5-8: reset high speed USB device using ehci_hcd and address 85 [ 1251.543072] zd1211rw 5-8:1.0: eth1 [ 1251.572694] usb 5-8: USB disconnect, address 85 [ 1252.627840] usb 5-8: new high speed USB device using ehci_hcd and address 86 [ 1254.343268] usb 5-8: new high speed USB device using ehci_hcd and address 87 [ 1254.479831] usb 5-8: configuration #1 chosen from 1 choice [ 1254.598639] usb 5-8: reset high speed USB device using ehci_hcd and address 87 [ 1254.733765] zd1211rw 5-8:1.0: eth1 [ 1254.895155] usb 5-8: USB control request for firmware upload failed. Error number -32 [ 1254.895165] usb 5-8: Could not upload firmware code uph. Error number -32 [ 1254.895193] zd1211rw 5-8:1.0: couldn't load firmware. Error number -32 [ 1255.254482] usb 5-8: USB disconnect, address 87 [ 1256.242599] usb 5-8: new high speed USB device using ehci_hcd and address 88 [ 1256.383642] usb 5-8: device descriptor read/all, error -71 [ 1257.323939] usb 5-8: new high speed USB device using ehci_hcd and address 90 [ 1257.460460] usb 5-8: configuration #1 chosen from 1 choice [ 1257.579312] usb 5-8: reset high speed USB device using ehci_hcd and address 90 [ 1257.735729] zd1211rw 5-8:1.0: eth1 [ 1259.200840] usb 5-8: USB control request for firmware upload failed. Error number -32 [ 1259.200850] usb 5-8: Could not upload firmware code uph. Error number -32 [ 1259.200876] zd1211rw 5-8:1.0: couldn't load firmware. Error number -32 [ 1261.258102] usb 5-8: USB control request for firmware upload failed. Error number -32 [ 1261.258111] usb 5-8: Could not upload firmware code uph. Error number -32 [ 1261.258136] zd1211rw 5-8:1.0: couldn't load firmware. Error number -32 [ 1263.887288] usb 5-8: USB control request for firmware upload failed. Error number -32 [ 1263.887297] usb 5-8: Could not upload firmware code uph. Error number -32 [ 1263.887324] zd1211rw 5-8:1.0: couldn't load firmware. Error number -32 [ 1280.881617] usb 5-8: USB control request for firmware upload failed. Error number -32 [ 1280.881627] usb 5-8: Could not upload firmware code uph. Error number -32 [ 1280.881653] zd1211rw 5-8:1.0: couldn't load firmware. Error number -32 [ 1288.148746] usb 5-8: USB disconnect, address 90 [ 1291.320344] usb 5-8: new high speed USB device using ehci_hcd and address 92 [ 1296.439922] usb 5-8: unable to read config index 0 descriptor/start: -110 [ 1296.439929] usb 5-8: chopping to 0 config(s) [ 1303.420686] usb 5-8: string descriptor 0 read error: -71 [ 1303.421649] usb 5-8: string descriptor 0 read error: -71 [ 1303.421773] usb 5-8: no configuration chosen from 0 choices [ 1303.421797] usb 5-8: USB disconnect, address 92 [ 1306.499032] usb 5-8: new high speed USB device using ehci_hcd and address 93 [ 1306.631553] usb 5-8: configuration #1 chosen from 1 choice [ 1306.754412] usb 5-8: reset high speed USB device using ehci_hcd and address 93 [ 1306.889624] zd1211rw 5-8:1.0: eth1 [ 1306.933163] usb 5-8: USB control request for firmware upload failed. Error number -32 [ 1306.933173] usb 5-8: Could not upload firmware code uph. Error number -32 [ 1306.933199] zd1211rw 5-8:1.0: couldn't load firmware. Error number -32 [ 1309.567070] usb 5-8: USB control request for firmware upload failed. Error number -32 [ 1309.567080] usb 5-8: Could not upload firmware code uph. Error number -32 [ 1309.567108] zd1211rw 5-8:1.0: couldn't load firmware. Error number -32 [ 1309.998834] usb 5-8: USB disconnect, address 93 [ 1312.528213] usb 5-8: new high speed USB device using ehci_hcd and address 94 [ 1312.676715] usb 5-8: configuration #1 chosen from 1 choice [ 1312.795560] usb 5-8: reset high speed USB device using ehci_hcd and address 94 [ 1312.959964] zd1211rw 5-8:1.0: eth1 [ 1314.315714] usb 5-8: USB control request for firmware upload failed. Error number -32 [ 1314.315723] usb 5-8: Could not upload firmware code uph. Error number -32 [ 1314.315750] zd1211rw 5-8:1.0: couldn't load firmware. Error number -32 [ 1316.173785] usb 5-8: USB disconnect, address 94 [ 1318.254152] usb 5-8: new high speed USB device using ehci_hcd and address 95 [ 1318.410683] usb 5-8: configuration #1 chosen from 1 choice [ 1318.529460] usb 5-8: reset high speed USB device using ehci_hcd and address 95 [ 1318.669979] zd1211rw 5-8:1.0: eth1 [ 1320.752130] usb 5-8: USB control request for firmware upload failed. Error number -32 [ 1320.752139] usb 5-8: Could not upload firmware code uph. Error number -32 [ 1320.752166] zd1211rw 5-8:1.0: couldn't load firmware. Error number -32 [ 1323.258753] usb 5-8: USB disconnect, address 95 [ 1325.408541] usb 4-2: new full speed USB device using uhci_hcd and address 2 [ 1325.536299] usb 4-2: device descriptor read/64, error -71 [ 1325.800504] usb 4-2: not running at top speed; connect to a high speed hub [ 1325.831613] usb 4-2: configuration #1 chosen from 1 choice [ 1325.951205] usb 4-2: reset full speed USB device using uhci_hcd and address 2 [ 1326.116416] zd1211rw 4-2:1.0: eth1 [ 1328.025721] zd1211rw 4-2:1.0: firmware version 4605 [ 1328.085567] zd1211rw 4-2:1.0: zd1211 chip 07b8:6001 v4330 full 00-12-0e RF2959_RF pa0 g---- [ 1328.120294] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 1328.592280] SoftMAC: Open Authentication completed with 00:15:e9:0d:a8:be [ 1328.611842] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 1338.767679] eth1: no IPv6 routers present [ 1356.607128] NET: Registered protocol family 17 [ 1357.336579] SoftMAC: Open Authentication completed with 00:15:0c:74:ad:b4 [ 1357.357457] ieee80211_crypt: registered algorithm 'WEP' [ 1357.929046] SoftMAC: Open Authentication completed with 00:15:0c:74:ad:b4 [ 1358.422756] SoftMAC: Open Authentication completed with 00:15:0c:74:ad:b4 [ 1379.786826] eth1: no IPv6 routers present ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Zd1211-devs mailing list - http://zd1211.wiki.sourceforge.net/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs