Hello, Have you tried without the cable?
Can you compile compat-wireless with CONFIG_ZD1211RW_DEBUG=y enabled, for more output from driver? (edit compat-wireless-[version]/config.mk, take out "# " from line with "CONFIG_ZD1211RW_DEBUG=y" and recompile) -Jussi Quoting "Roh ." <rohb...@hotmail.com>: > > Hi Devs, > > I hope someone can shed some light on why I am seeing these errors. > > When using the standard zd1211rw, mac802111 & cfg80211 drivers that > come with fedora 14 (2.6.35.13-91) i am able to run my zd1211-based > device perfectly without a glitch over a 10m UTP usb extension. I > can even run airodump-ng for days on end without a glitch (of course > no packet injection or signal level feedback). > > However when I try to use the compat-wireless-2011-05-26 or > compat-wireless-2011-04-22 drivers I receive firmware timeout > errors. Please see /var/log/message output below: > > Using stock Fedora 14 2.6.35.13-91 drivers: (works ok) > > May 29 17:14:28 rf kernel: [ 7296.240037] usb 2-2: new full speed > USB device using ohci_hcd and address 5 > May 29 17:14:28 rf kernel: [ 7296.417134] usb 2-2: not running at > top speed; connect to a high speed hub > May 29 17:14:28 rf kernel: [ 7296.432140] usb 2-2: New USB device > found, idVendor=07b8, idProduct=6001 > May 29 17:14:28 rf kernel: [ 7296.432213] usb 2-2: New USB device > strings: Mfr=16, Product=32, SerialNumber=0 > May 29 17:14:28 rf kernel: [ 7296.432322] usb 2-2: Product: USB2.0 WLAN > May 29 17:14:28 rf kernel: [ 7296.432379] usb 2-2: Manufacturer: wug2670 > May 29 17:14:29 rf kernel: [ 7296.738492] cfg80211: Calling CRDA to > update world regulatory domain > May 29 17:14:29 rf kernel: [ 7296.995070] usb 2-2: reset full speed > USB device using ohci_hcd and address 5 > May 29 17:14:29 rf kernel: [ 7297.010274] cfg80211: World regulatory > domain updated: > May 29 17:14:29 rf kernel: [ 7297.010346] (start_freq - end_freq > @ bandwidth), (max_antenna_gain, max_eirp) > May 29 17:14:29 rf kernel: [ 7297.010457] (2402000 KHz - 2472000 > KHz @ 40000 KHz), (300 mBi, 2000 mBm) > May 29 17:14:29 rf kernel: [ 7297.010519] (2457000 KHz - 2482000 > KHz @ 20000 KHz), (300 mBi, 2000 mBm) > May 29 17:14:29 rf kernel: [ 7297.010583] (2474000 KHz - 2494000 > KHz @ 20000 KHz), (300 mBi, 2000 mBm) > May 29 17:14:29 rf kernel: [ 7297.010646] (5170000 KHz - 5250000 > KHz @ 40000 KHz), (300 mBi, 2000 mBm) > May 29 17:14:29 rf kernel: [ 7297.010709] (5735000 KHz - 5835000 > KHz @ 40000 KHz), (300 mBi, 2000 mBm) > May 29 17:14:29 rf kernel: [ 7297.235267] zd1211rw 2-2:1.0: phy0 > May 29 17:14:29 rf kernel: [ 7297.235405] usbcore: registered new > interface driver zd1211rw > May 29 17:14:30 rf kernel: [ 7297.977792] cfg80211: Calling CRDA for > country: AU > May 29 17:14:30 rf kernel: [ 7297.999546] cfg80211: Regulatory > domain changed to country: AU > May 29 17:14:30 rf kernel: [ 7297.999619] (start_freq - end_freq > @ bandwidth), (max_antenna_gain, max_eirp) > May 29 17:14:30 rf kernel: [ 7297.999727] (2402000 KHz - 2482000 > KHz @ 40000 KHz), (N/A, 2000 mBm) > May 29 17:14:30 rf kernel: [ 7297.999789] (5170000 KHz - 5250000 > KHz @ 40000 KHz), (300 mBi, 2300 mBm) > May 29 17:14:30 rf kernel: [ 7297.999852] (5250000 KHz - 5330000 > KHz @ 40000 KHz), (300 mBi, 2300 mBm) > May 29 17:14:30 rf kernel: [ 7297.999914] (5735000 KHz - 5835000 > KHz @ 40000 KHz), (300 mBi, 3000 mBm) > May 29 17:14:31 rf kernel: [ 7298.945539] zd1211rw 2-2:1.0: firmware > version 4605 > May 29 17:14:31 rf kernel: [ 7299.005554] zd1211rw 2-2:1.0: zd1211 > chip 07b8:6001 v4330 full 00-12-0e AL2230_RF pa0 g---- > May 29 17:14:31 rf kernel: [ 7299.010584] cfg80211: Calling CRDA for > country: DE > May 29 17:14:31 rf kernel: [ 7299.026125] cfg80211: Current > regulatory domain intersected: > May 29 17:14:31 rf kernel: [ 7299.026198] (start_freq - end_freq > @ bandwidth), (max_antenna_gain, max_eirp) > May 29 17:14:31 rf kernel: [ 7299.026309] (2402000 KHz - 2482000 > KHz @ 40000 KHz), (N/A, 2000 mBm) > May 29 17:14:31 rf kernel: [ 7299.026371] (5170000 KHz - 5250000 > KHz @ 40000 KHz), (N/A, 2000 mBm) > May 29 17:14:31 rf kernel: [ 7299.026431] (5250000 KHz - 5330000 > KHz @ 40000 KHz), (N/A, 2000 mBm) > May 29 17:14:31 rf kernel: [ 7299.071672] ADDRCONF(NETDEV_UP): > wlan0: link is not ready > > Using compat-wireless-2011-04-22 (firmware upload fails): > > May 29 17:09:47 rf kernel: [ 7015.122044] usb 2-2: new full speed > USB device using ohci_hcd and address 4 > May 29 17:09:47 rf kernel: [ 7015.299130] usb 2-2: not running at > top speed; connect to a high speed hub > May 29 17:09:47 rf kernel: [ 7015.314138] usb 2-2: New USB device > found, idVendor=07b8, idProduct=6001 > May 29 17:09:47 rf kernel: [ 7015.314210] usb 2-2: New USB device > strings: Mfr=16, Product=32, SerialNumber=0 > May 29 17:09:47 rf kernel: [ 7015.314317] usb 2-2: Product: USB2.0 WLAN > May 29 17:09:47 rf kernel: [ 7015.314374] usb 2-2: Manufacturer: wug2670 > May 29 17:09:48 rf kernel: [ 7015.784541] cfg80211: Calling CRDA to > update world regulatory domain > May 29 17:09:48 rf kernel: [ 7016.323803] cfg80211: World regulatory > domain updated: > May 29 17:09:48 rf kernel: [ 7016.323875] cfg80211: (start_freq > - end_freq @ bandwidth), (max_antenna_gain, max_eirp) > May 29 17:09:48 rf kernel: [ 7016.323988] cfg80211: (2402000 KHz > - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > May 29 17:09:48 rf kernel: [ 7016.324155] cfg80211: (2457000 KHz > - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) > May 29 17:09:48 rf kernel: [ 7016.324269] cfg80211: (2474000 KHz > - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) > May 29 17:09:48 rf kernel: [ 7016.324378] cfg80211: (5170000 KHz > - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > May 29 17:09:48 rf kernel: [ 7016.324487] cfg80211: (5735000 KHz > - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > May 29 17:09:48 rf kernel: [ 7016.425051] usb 2-2: reset full speed > USB device using ohci_hcd and address 4 > May 29 17:09:48 rf kernel: [ 7016.609866] zd1211rw 2-2:1.0: phy0 > May 29 17:09:48 rf kernel: [ 7016.612213] usbcore: registered new > interface driver zd1211rw > May 29 17:09:49 rf kernel: [ 7017.026556] udev[8907]: renamed > network interface wlan%d to wlan0 > May 29 17:09:49 rf kernel: [ 7017.498004] cfg80211: Calling CRDA for > country: AU > May 29 17:09:49 rf kernel: [ 7017.539227] cfg80211: Regulatory > domain changed to country: AU > May 29 17:09:49 rf kernel: [ 7017.539299] cfg80211: (start_freq > - end_freq @ bandwidth), (max_antenna_gain, max_eirp) > May 29 17:09:49 rf kernel: [ 7017.539410] cfg80211: (2402000 KHz > - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) > May 29 17:09:49 rf kernel: [ 7017.539519] cfg80211: (5170000 KHz > - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) > May 29 17:09:49 rf kernel: [ 7017.539627] cfg80211: (5250000 KHz > - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) > May 29 17:09:49 rf kernel: [ 7017.539736] cfg80211: (5735000 KHz > - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) > May 29 17:09:50 rf kernel: [ 7018.020584] ohci_hcd 0000:00:03.0: > leak ed cb972100 (#04) state 2 > May 29 17:09:57 rf kernel: [ 7025.061672] usb 2-2: USB control > request for firmware upload failed. Error number -110 > May 29 17:09:57 rf kernel: [ 7025.061794] usb 2-2: Could not upload > firmware code uph. Error number -110 > May 29 17:09:57 rf kernel: [ 7025.061872] zd1211rw 2-2:1.0: couldn't > load firmware. Error number -110 > > There are no other usb device plugged into this pc to cause a conflict: > [root@rf ~]# lsusb > > Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 002 Device 005: ID 07b8:6001 D-Link Corp. 802.11bg > Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > I know I am pushing usb to its limits using a 10 meter UTP cable, > but I'm still curious as to why one driver works fine, and another > driver fails? > > Thanks for any help/tips/ideas etc. > > Regards, > Rohan. ------------------------------------------------------------------------------ vRanger cuts backup time in half-while increasing security. With the market-leading solution for virtual backup and recovery, you get blazing-fast, flexible, and affordable data protection. Download your free trial now. http://p.sf.net/sfu/quest-d2dcopy1 _______________________________________________ Zd1211-devs mailing list - http://zd1211.wiki.sourceforge.net/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs
