Thanks I'll try this for now, At the moment upgrading causing a short downtime
on our production servers wouldn't be good So I'll upgrade from V1 stable to
V2rc1 in a few weeks.
From: Marco Tiggelaar - Key4ce [mailto:[email protected]]
Sent: Monday, December 12, 2011 7:12 PM
To: [email protected]
Subject: Re: [Zenloadbalancer-support] Farm balanced by priority still sends
connections to lower priority
As far as i know setting it to Weight: connection LINEAR dispatching by weight
will give you what you want.
(I encountered the same results as you during my testing days - setting it to
weight solved it).
Regards,
Marco
Van: Steve LePage [mailto:[email protected]]
Verzonden: dinsdag 13 december 2011 2:32
Aan: [email protected]
Onderwerp: [Zenloadbalancer-support] Farm balanced by priority still sends
connections to lower priority
I have a farm setup and it's alg is set to priority and I have set 1 real
server to a priority of 1000 and another to a priority of 1. When I look at the
connections taking place on the farm when both servers are available I see
connections going to both servers. I want them to go to the server with higher
priority only effectively making it a master and the one with lower priority a
failover slave. I was under the impression priority did this but it seems like
it may be bleeding connections? I have attached a screen shot of what I'm seeing
------------------------------------------------------------------------------
Systems Optimization Self Assessment
Improve efficiency and utilization of IT resources. Drive out cost and
improve service delivery. Take 5 minutes to use this Systems Optimization
Self Assessment. http://www.accelacomm.com/jaw/sdnl/114/51450054/
_______________________________________________
Zenloadbalancer-support mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
