Hi, the protocol of this packets are ICMP, not UDP.
Have you try to use NAT?
Also, a screenshot of your farm configuration will be useful.
Regards.
On Fri, Aug 2, 2013 at 7:33 PM, <[email protected]> wrote:
> Thanks Laura for your response
>
> I have a farm for TFTP with L4uxnat with UDP port set to *
>
> I have set the default gateway to point to ZenLB (x.x.x.145), but
> still not luck, neither using the normal gateway
>
> Using WireShark on the TFTP real server I'm getting the following
> errors when I try to connect from an external client (my PC or other server
> on the same network)
>
>
>
>
> Source
> Destination Protocol Info
> 36 7.685718000 x.x.x.185 x.x.x.145
> ICMP 190 Destination unreachable (Port unreachable)
> 37 7.685801000 x.x.x.145 x.x.x.185
> ICMP 190 Destination unreachable (Port unreachable)
>
> Where x.x.x185 is the TFTP Server
> x.x.x.145 is the VIP for ZenLB Server
>
> If I connect directly to the TFTP real server it works fine,
> changing the gateway to the normal gateway (x.x.x1)
>
> I can do TFTP between the servers that are in the farm using the
> V-IP from Zen LB, but not from any other client even if the are in the same
> network
>
>
>
>
> Raul
> Thanks
> ------------------------------
>
> ------------------------------
> — Reply by [email protected] On 8/2/2013 10:44:24 AM —
>
> [email protected] To： [email protected] Cc：
> 8/2/2013 10:41:43 AM Subject： Re: [Zenloadbalancer-support] TFTP Load
> balancing
> Hi, the TFTP uses random UDP ports so the L4uxnat is the farm for your
> case. Use all ports with " * "
>
> Regards
>
>
>
>
> On Thu, Aug 1, 2013 at 6:27 PM, <[email protected]> wrote:
>
>> Hi
>>
>> Some one knows how to configure ZenLB for TFTP? I already configured
>> a farm with the servers with UDP port 69 but is not working
>>
>> I'm using Solar Winds TFTP server and I'm getting the following
>> message: "Dropped beacuase peer didn't respond"
>>
>> I connect directly to the physical tftp it works just fine
>>
>> How do I configure multiple port o a range of ports to a farm?
>> syntaxis
>>
>> Thanks!
>>
>>
>> Raul Pedroza
>>
>>
>>
>>
>> ------------------------------------------------------------------------------
>> Get your SQL database under version control now!
>> Version control is standard for application code, but databases havent
>> caught up. So what steps can you take to put your SQL databases under
>> version control? Why should you start doing it? Read more to find out.
>>
>> http://pubads.g.doubleclick.net/gampad/clk?id=49501711&iu=/4140/ostg.clktrk
>> _______________________________________________
>> Zenloadbalancer-support mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
>>
>>
>
> mail from ip-->10.13.27.52
> mail from pc-->MXWS-374WQL1
> Version: Super Notes 1.4.9.9B
>
>
------------------------------------------------------------------------------
Get your SQL database under version control now!
Version control is standard for application code, but databases havent
caught up. So what steps can you take to put your SQL databases under
version control? Why should you start doing it? Read more to find out.
http://pubads.g.doubleclick.net/gampad/clk?id=49501711&iu=/4140/ostg.clktrk
_______________________________________________
Zenloadbalancer-support mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
