Got it! Thanks for your help
Jim James M Doherty President Revive Consulting LLC. 512-650-2997 ( O ) 512-217-6302 ( C ) > On Nov 3, 2014, at 09:37, Emilio Campos <emilio.campos.mar...@gmail.com> > wrote: > > Hi James, I paste you from the official documentation: > > http://www.zenloadbalancer.com/zlb-administration-guide-v305/#MANAGEFARMS_SECTION > > > Profile: Define the type of farm and load balancing method for the new farm. > You could choose one of the following profiles: > TCP: It’s a simple load balancing that delivers traffic in raw TCP data at > application layer (layer 7). The basic mechanism is about open 2 sockets for > every connection, one to the client and other to the real server, and then > delivers the raw data between them. The selection of this method could be > adecuated for protocols like SMTP, RDP, IMAP, LDAP, SSH, etc. This profile is > marked as obsolete, use the L4 profile farms instead. In order to configure > this farm profile, a virtual IP address and a virtual TCP port will be > required. > UDP: It’s a simple load balancing that delivers traffic in raw UDP data at > application layer (layer 7). The basic mechanism is about open 2 sockets for > every connection, one to the client and other to the real server, and then > delivers the raw data between them. The selection of this method could be > adecuated for protocols like DNS, NTP, TFTP, BOOTP, SNMP, etc. This profile > is marked as obsolete, use the L4 profile farms instead. In order to > configure this farm profile, a virtual IP address and a virtual UDP port will > be required. > HTTP: It’s an advanced HTTP layer 7 load balancing (or Application Delivery > Controller) with proxy special properties. It’s included in this profile > features like HTTPS layer 7 load balancing combinated with SSL offload > acceleration This profile is adecuated for web services (web application > servers included) and all application protocols based on HTTP and HTTPS > protocols like WebDav, RDP over HTTP, ICA over HTTP, etc. In order to > configure this farm profile, a virtual IP address and a virtual TCP port will > be required. > L4xNAT: It’s an high performance load balancing system at routing layer 4 > which combines multiples of load balancing methods like Source NAT and > Destination NAT. This profile could handle any kind of protocols like TCP, > UDP, ICMP, etc, and all protocols based on them. In order to configure this > farm profile, a virtual IP address will be required. Later, in the main farm > configuration, it’s possible to specify a TCP or UDP protocol and a port o > port range. > DATALINK: It’s a routing load balancing system at layer3 which balances the > load through routes across different networks allowing to balance routers > uplink accesses to internet. This is a protocol agnostic load balancing > method. In order to configure this farm profile, a virtual IP address will be > required. > > > > > > SO if you want to load balance in base to virtualhosts, URIs, to work with > persistence session for cookies, to configure ssl offload, etc.. then you > have to use the specified profile HTTP, in other cases use TCP profile. The > HTTP profile is a more advanced profile ready for web services. > > Regards! > > > > > > 2014-11-03 15:19 GMT+01:00 James M Doherty <j...@jdoherty.net>: >> Emilio thanks for the response what is the difference between the H TTP is >> the TCP Farms >> >> James M Doherty >> President >> Revive Consulting LLC. >> 512-650-2997 ( O ) >> 512-217-6302 ( C ) >> >> >> >>> On Nov 3, 2014, at 07:42, Emilio Campos <emilio.campos.mar...@gmail.com> >>> wrote: >>> >>> Hi James, your attached file shows a HTTP profile, so maybe you are doing >>> reference to other field for a TCP farm not HTTP farm. >>> >>> Regards >>> >>> 2014-11-01 15:20 GMT+01:00 James M Doherty <j...@jdoherty.net>: >>>> Attached screen shot, the documentation shows max connections but the web >>>> interface does not show it? >>>> >>>> Jim >>>> >>>> >>>> >>>>> On 11/01/2014 08:26 AM, James M Doherty wrote: >>>>> Hi guys, >>>>> >>>>> Well today I have put ZLB into production and on the global view I am >>>>> seeing it hit 80% connections. >>>>> >>>>> Where can I find the config for max number of connections? >>>>> >>>>> I have a rather large ZLB server. I have a user base of over 65,000 users. >>>>> >>>>> DETAILS BELOW: >>>>> >>>>> top - 08:24:09 up 17 days, 14:51, 1 user, load average: 0.00, 0.00, 0.00 >>>>> Tasks: 128 total, 1 running, 127 sleeping, 0 stopped, 0 zombie >>>>> Cpu0 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, >>>>> 0.0%st >>>>> Cpu1 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, >>>>> 0.0%st >>>>> Cpu2 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, >>>>> 0.0%st >>>>> Cpu3 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, >>>>> 0.0%st >>>>> Cpu4 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, >>>>> 0.0%st >>>>> Cpu5 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, >>>>> 0.0%st >>>>> Cpu6 : 0.0%us, 0.3%sy, 0.0%ni, 99.7%id, 0.0%wa, 0.0%hi, 0.0%si, >>>>> 0.0%st >>>>> Cpu7 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, >>>>> 0.0%st >>>>> Mem: 3103928k total, 178704k used, 2925224k free, 99956k buffers >>>>> Swap: 6066168k total, 0k used, 6066168k free, 36960k cached >>>>> >>>>> I want to make sure that I have this set high enough not to cause issues. >>>>> >>>>> I read online about FARM limits on sim connections etc. and I am a litter >>>>> concerned. >>>>> >>>>> Thanks for your help >>>>> >>>>> Jim >>>>> >>>>> -- >>>>> <mime-attachment.jpg> >>>>> James M Doherty >>>>> >>>>> President >>>>> >>>>> REVIVE CONSULTING LLC. >>>>> >>>>> <mime-attachment.png> >>>>> 512-650-2997 >>>>> >>>>> Patents James M Doherty (36) >>>>> A mi Dios y mi familia >>>>> "For My God and My Family" >>>>> Cuando Sea, Lo Que Sea, Donde Sea >>>>> "Anything,Any-time,Anywhere" >>>>> >>>>> The budget should be balanced, the treasury should be refilled, public >>>>> debt should be reduced, the arrogance of officialdom should be tempered >>>>> and controlled, and the assistance to foreign lands should be curtailed >>>>> lest Rome become bankrupt, the mobs should be forced to work and not >>>>> depend on government for subsistence." >>>>> >>>>> Marcus Tullius Cicero - 55 BC >>>>> >>>>> "You cannot legislate the poor into freedom by legislating the wealthy >>>>> out of freedom. What one person receives without working for, another >>>>> person must work for without receiving. The government cannot give to >>>>> anybody anything that the government does not first take from somebody >>>>> else. When half of the people get the idea that they do not have to work >>>>> because the other half is going to take care of them, and when the other >>>>> half gets the idea that it does no good to work because somebody else is >>>>> going to get what they work for, that my dear friend, is about the end of >>>>> any nation. You cannot multiply wealth by dividing it." >>>>> The late Dr. Adrian Rogers , 1931 to 2005 >>>>> >>>> >>>> -- >>>> <my_email_picture.jpg> >>>> James M Doherty >>>> >>>> President >>>> >>>> REVIVE CONSULTING LLC. >>>> >>>> <revive_logo_400_240.png> >>>> 512-650-2997 >>>> >>>> Patents James M Doherty (36) >>>> A mi Dios y mi familia >>>> "For My God and My Family" >>>> Cuando Sea, Lo Que Sea, Donde Sea >>>> "Anything,Any-time,Anywhere" >>>> >>>> The budget should be balanced, the treasury should be refilled, public >>>> debt should be reduced, the arrogance of officialdom should be tempered >>>> and controlled, and the assistance to foreign lands should be curtailed >>>> lest Rome become bankrupt, the mobs should be forced to work and not >>>> depend on government for subsistence." >>>> >>>> Marcus Tullius Cicero - 55 BC >>>> >>>> "You cannot legislate the poor into freedom by legislating the wealthy out >>>> of freedom. What one person receives without working for, another person >>>> must work for without receiving. The government cannot give to anybody >>>> anything that the government does not first take from somebody else. When >>>> half of the people get the idea that they do not have to work because the >>>> other half is going to take care of them, and when the other half gets the >>>> idea that it does no good to work because somebody else is going to get >>>> what they work for, that my dear friend, is about the end of any >>>> nation. You cannot multiply wealth by dividing it." >>>> The late Dr. Adrian Rogers , 1931 to 2005 >>>> >>>> >>>> ------------------------------------------------------------------------------ >>>> >>>> _______________________________________________ >>>> Zenloadbalancer-support mailing list >>>> Zenloadbalancer-support@lists.sourceforge.net >>>> https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support >>> >>> >>> >>> -- >>> Load balancer distribution - Open Source Project >>> http://www.zenloadbalancer.com >>> Distribution list (subscribe): zenloadbalancer-support@lists.sourceforge.net >>> ------------------------------------------------------------------------------ >>> _______________________________________________ >>> Zenloadbalancer-support mailing list >>> Zenloadbalancer-support@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support >> >> ------------------------------------------------------------------------------ >> >> _______________________________________________ >> Zenloadbalancer-support mailing list >> Zenloadbalancer-support@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support > > > > -- > Load balancer distribution - Open Source Project > http://www.zenloadbalancer.com > Distribution list (subscribe): zenloadbalancer-support@lists.sourceforge.net > ------------------------------------------------------------------------------ > _______________________________________________ > Zenloadbalancer-support mailing list > Zenloadbalancer-support@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
------------------------------------------------------------------------------
_______________________________________________ Zenloadbalancer-support mailing list Zenloadbalancer-support@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
