Hi Leon, While I don’t have a solution, I’m also concerned by the somewhat archaic kernel in use by Zen.
@Zen developers – is there a reason for using such an old kernel? Jonathan Jonathan Haddock MSc MBCS Network and Security Engineer EK Services Tel No: 01227 862 036 jonathan.hadd...@ekservices.org<mailto:jonathan.hadd...@ekservices.org> EK Services - working in partnership with Canterbury City Council, Dover District Council and Thanet District Council From: Leon Biggel [mailto:leonbig...@hotmail.com] Sent: 08 October 2015 14:54 To: zenloadbalancer-support@lists.sourceforge.net Subject: [Zenloadbalancer-support] Cannot install Broadcom 5720 I'm experiencing a lot of problems installing the Zen 305 or even the 37 on a Dell server R310 with broadcom BCM5720 network cards. During installation, the Zen installer tells me that no network card is detected, but there is bnx2 or Tigon t3 in the network-list which should work. Even if I select the bnx2 or t3, nothing happens. I downloaded the drivers for debian6 and load it from usb, but still, nothing found. The fact that Zen is still on Debian6 is starting to cause some severe problem I think for the future. Meanwhile, does someone have a solution, so I can load the bcm5720 cards from USB for the Zen installation ? ---------------------------------------------------------------------- Please consider the environment before printing this email. This e-mail and any attachments are confidential and intended solely for the addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the addressee, or have received this email in error, please notify the sender immediately, delete it from your system and do not copy, disclose or otherwise act upon any part of this e-mail or its attachments. Any views expressed in this email are those of the individual sender, except where the sender specifies and with authority, states them to be the views of EK Services. Whilst all reasonable care has been taken to avoid the transmission of viruses, it is the responsibility of the recipient to ensure that the onward transmission, opening or use of this email and any attachments will not adversely affect its systems or data. No responsibility is accepted by EK Services in this regard and the recipient should carry out such virus and other checks as it considers appropriate. All communications sent to or from EK Services may be subject to recording and/or monitoring in accordance with relevant legislation.
------------------------------------------------------------------------------
_______________________________________________ Zenloadbalancer-support mailing list Zenloadbalancer-support@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
