Hi Frank, Please check your routing table on each appliance. It seem that your routed interface to 172.28.10.1 is eth0, not eth4. You can share the routing table too.
Best regards, On Fri, Aug 19, 2016 at 6:21 PM, Frank Liebelt <frank.lieb...@bca.com> wrote: > Hi all, > > > > i set up a cluster and configured one farm. > > The farm profile is set to lx4nat. > > Protocol TCP, NAT is SNAT. > > > > When I use the Farm IP for connect to an MySQL Cluster, it will not pass > the IP of the farm to the MySQL server. It is always the eth0 IP of the > currently active load balancer. > > For my understanding, i should connect to the MySQL Server with the IP > address of eth4. Like described in the manual. > > > > MySQL Client -> FarmIP 192.168.100.230 -> RealServer -> 172.28.10.1 > > MySQL shows connection from 192.168.100.101 not 192.168.100.230 > > > > Any suggestions what goes wrong? > > > > Here is my setup: > > > > LB Community Edition 3.10.1 > > > > Appliance 1 (active): > > eth0: 192.168.100.101 > > eth0:ha 192.168.100.100 > > eth4: 192.168.100.230 (Farm) > > > > Appliance 2: > > eth0: 192.168.100.102 > > eth0:ha 192.168.100.100 > > eth4: 192.168.100.230 (Farm) > > > > The Replication between the two appliance is working well. > > > > regards > > Frank Liebelt > > > > ------------------------------------------------------------ > ------------------ > > _______________________________________________ > Zenloadbalancer-support mailing list > Zenloadbalancer-support@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support > >
------------------------------------------------------------------------------
_______________________________________________ Zenloadbalancer-support mailing list Zenloadbalancer-support@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
