Hello
all,
I have been trying
to get my Windows server and workstation graphs (CPU and Memory more
specifically) working. I have installed the Informant agents because this
is required apparently (can someone confirm this). I have confirmed that I
am using the correct OID by typing in the snmpwalk command with the following
parameters:
/usr/bin/snmpwalk -v 2c -c <Community string> <Host>
.1.3.6.1.4.1.9600.1.1.5.1.5
I and I
receive the following response:
SNMPv2-SMI::enterprises.9600.1.1.5.1.5.1.48 = Gauge32:
6
SNMPv2-SMI::enterprises.9600.1.1.5.1.5.6.95.84.111.116.97.108 = Gauge32: 6
SNMPv2-SMI::enterprises.9600.1.1.5.1.5.6.95.84.111.116.97.108 = Gauge32: 6
The 6 is the
correct CPU% currently being used on the machine being queried, however, when
the machine is queried I can see the following lines
zenperfsnmp.log
2006-08-24
00:06:57 WARNING zen.zenperfsnmp: Error reading value for "CPU" on <Host>
(oid .1.3.6.1.4.1.9600.1.1.5.1.5 is bad)
I am
configuring this information under the PerfConf of the device being monitored,
in the section RRDDataSources, and then configuring the Graphs for these
metrics.
Can someone
tell me what I am doing wrong.
Thank you in
advanced.
Todd W
Smeed
_______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
