Since the
installation of zenoss on my machine I have been receiving these events, it's
only occurring on the machine which hosts zenoss. I typically receive a
"cleared" message after a while. Are these events
preventable?
<HOST>|zenagios|/Status/Heartbeat||4<HOST>
zenagios heartbeat failure
Thank you for your
responses to my previous issue (Graphs not populating), as Eric indicated the
OID I entered was incomplete. After reviewing the response from the SNMP
agent further, I found that the system had responded with two
OID's.
[root@<Host>
tsmeed]# /usr/bin/snmpwalk -v 2c -c Syndic8ds <Host>
.1.3.6.1.4.1.9600.1.1.5.1.5
SNMPv2-SMI::enterprises.9600.1.1.5.1.5.1.48 = Gauge32: 0
SNMPv2-SMI::enterprises.9600.1.1.5.1.5.6.95.84.111.116.97.108 = Gauge32: 4
Once I entered the
SNMPv2-SMI::enterprises.9600.1.1.5.1.5.6.95.84.111.116.97.108 as the OID I was able to observe the graphs being
populated.
_______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
