The ZENHOME environment variable is not being preserved by sudo on your
machine. You need something like this in /etc/sudoers:
Defaults env_reset
Defaults env_keep = "PYTHONPATH ZENHOME"
root ALL=(ALL) ALL
travis ALL=(ALL) NOPASSWD: ALL
-Eric
Travis Freeland wrote:
ERIC thanks for the help. When I updated mysql the 5.0 mysql db was
installed under /var/lib/mysql/mysql and my my.cnf file had the datadir to
/db/. I copied the 5.0 mysql db to my /db/mysql/ (which added the proc
table) and this fixed the install issue. I wanted to post in case others
have same issue.
I regret that I have another problem. I can not get
/usr/local/zenoss/bin/zenoss (status) to run or any other demon (zenping).
I get the following error for zenping as root user:
[root@ bin]# pwd
/usr/local/zenoss/bin
[root@ bin]# bash zenping start
zenping: line 3: /bin/zenfunctions: No such file or directory
zenping: line 11: generic: command not found
[root@ bin]# zenping start
-bash: zenping: command not found
[root@ bin]# bash zenoss status
zenoss: line 9: /bin/zenfunctions: No such file or directory
Usage: zenoss {start|stop|restart|status}
I also get same errors running as user zenoss.
[zenoss@ bin]$ zenoss status
bash: zenoss: command not found
[zenoss@ bin]$ bash zenoss status
zenoss: line 9: /bin/zenfunctions: No such file or directory
Usage: zenoss {start|stop|restart|status}
I followed the install instructions on adding the PATH variables to the
.bash_profile in /home/zenoss/. I also added them at the top of the
zenfunctions file as you suggested on the mailing list. I did not add
zenoss as a sudeor since I want to run the required deamons as root (i.e.
zenping). I can not start /bin/zenoss or /bin/zenping as user zenoss or
root after a reboot. It seems to not like the read-write zenfunctions file.
Should this file be executable and should it have bash syntax at the top??
Do you happen to have an init startup script that could work instead? Any
info will be great.
Thanks
Travis Freeland
Seems like the 4.x version of mysql is still running because it
didn't have stored procedures there for table mysql.proc isn't there...
-EAD
On Aug 29, 2006, at 5:46 PM, Travis Freeland wrote:
I found an error in the zenbuild.log:
"ERROR 1146 (42S02) at line 4: Table 'mysql.proc' doesn't exist"
Only error any clue???
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Travis Freeland
Sent: Tuesday, August 29, 2006 4:20 PM
To: [email protected]
Subject: [zenoss-users] Problem with MySQL event tables during install
I can't get Zenoss to install on Fedora4. I updated the mysql from
4.1 to
5.0.24 and have all the appropriate dependencies that Zenoss
requires. I
run the install script as user zenoss and I get the following error.
### zenoss-0.22.1]$ bash install.sh
MySQL username for Zenoss events database [root]: mysql
MySQL password for mysql:
Password for the Zenoss "admin" user:
Enter the password again:
installing into /usr/local/zenoss
build log is in zenbuild.log
installing libzenos/Products.tar.gz
installing libzenos/bin.tar.gz
unpacking CMF-1.5.6 in build/
unpacking Zope-2.8.8-final in build/
configuring build/Zope-2.8.8-final/makefile
installing zope
Wrote file /usr/local/zenoss/etc/zeo.conf
Wrote file /usr/local/zenoss/bin/zeoctl
Changed mode for /usr/local/zenoss/bin/zeoctl to 775
Wrote file /usr/local/zenoss/bin/runzeo
Changed mode for /usr/local/zenoss/bin/runzeo to 775
installing cmf
unpacking TwistedSNMP-0.3.13 in build/
patching file snmpprotocol.py
patching file v3/agentproxy.py
unpacking pysnmp-3.4.3 in build/
patching file pysnmp/proto/rfc1155.py
installing pysnmp
unpacking Twisted-2.4.0 in build/
unpacking pycrypto-1.9a6 in build/
installing pycrypto
installing twisted
installing twistedsnmp
unpacking MySQL-python-1.2.0 in build/
installing mysql-python
unpacking rrdtool-1.2.11 in build/
unpacking libart_lgpl-2.3.17 in build/
configuring build/libart_lgpl-2.3.17/Makefile
Installing libart-install
unpacking freetype-2.1.9 in build/
configuring build/freetype-2.1.9/Makefile
Installing freetype-install
unpacking libpng-1.2.8-config in build/
configuring build/libpng-1.2.8-config/Makefile
Installing libpng-install
configuring build/rrdtool-1.2.11/Makefile
installing rrdtool
unpacking epydoc-2.1 in build/
installing epydoc
unpacking snpplib-1.1 in build/
patching file snpplib.py
installing snpp
unpacking Yapps-2.1.1 in build/
installing yapps
unpacking nagios-plugins-1.4.3 in build/
configuring build/nagios-plugins-1.4.3/Makefile
Installing nagios-install
unpacking libsmi-0.4.5 in build/
configuring build/libsmi-0.4.5/Makefile
installing libsmi
installing conf/freetds.conf
installing conf/zenactions.conf
installing conf/zenagios.conf
installing conf/zendisc.conf
installing conf/zenmib.conf
installing conf/zenmigrate.conf
installing conf/zenmodeler.conf
installing conf/zenperfsnmp.conf
installing conf/zenping.conf
installing conf/zenprocess.conf
installing conf/zenstatus.conf
installing conf/zensyslog.conf
installing conf/zentrap.conf
installing conf/zenxevent.conf
unable to install MySQL event tables
The error says unable to install MYSQL event tables. But I can log
into the
events database that zenoss creates and here are the tables it
created. The
mysql user above has superuser privileges. (I even tried a fresh
install
with mysql user root, same error).
mysql> show tables;
+------------------+
| Tables_in_events |
+------------------+
| alert_state |
| detail |
| heartbeat |
| history |
| log |
| status |
+------------------+
6 rows in set (0.00 sec)
I provided mysql server version below if it helps any. If anyone has
encountered this issue please let me know how you resolved this. I
like
what I see with this software and would like to test it.
mysql Ver 14.12 Distrib 5.0.24, for pc-linux-gnu (i686) using
readline 5.0
Thanks,
Travis Freeland
GVTC
Network Specialist
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
