Yeah, through trial and error counter seems to be the right type but the
format string is what I'm trying to get straight.
These will be non-decimal or * 8 numbers, I just want to graph the exact
number returned from the snmp query, what would be the format string for
that and could you point me to a reference for those formats?
%1lf and %0.1lf perform some unwanted decimal placement and arithmatic
on the returned values, bank and % don't seem to work at all.
Eric Newton wrote:
Your type should be COUNTER or GAUGE. Yours are likely GAUGE values.
-Eric
Marshall Shelton wrote:
I'm trying to set up a couple rrd data sources and graphs for a few
devices and oids that are integers, one is the off a Cisco CSS
returning the number of current connections to a given service and
the other is off a dialup device reporting how many DS0s are
currently being used.
An example is below;
$ snmpget -v 2c -c xxx 10.25.254.4
1.3.6.1.4.1.2467.1.15.2.1.63.5.112.101.97.114.108
SNMPv2-SMI::enterprises.2467.1.15.2.1.63.5.112.101.97.114.108 =
INTEGER: 34
$ snmpget -v 2c -c xxx 10.25.254.4
1.3.6.1.4.1.2467.1.15.2.1.63.5.112.101.97.114.108
SNMPv2-SMI::enterprises.2467.1.15.2.1.63.5.112.101.97.114.108 =
INTEGER: 63
$ snmpget -v 2c -c xxx 10.25.254.4
1.3.6.1.4.1.2467.1.15.2.1.63.5.112.101.97.114.108
SNMPv2-SMI::enterprises.2467.1.15.2.1.63.5.112.101.97.114.108 =
INTEGER: 57
My question is, in the PerfConf menu what should be my "Type" setting
what should be my format sting?
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
