Hi Joseph,
Here's how you can register mibs with Zenoss:
http://dev.zenoss.org/trac/wiki/FAQ#HowdoIregistermibswithZenoss
You can load the nagios plugins using any mechanism supported by
nagios. There are rpms for Red-Hat based distros, for example.
You may wish to modify the zProperty zCommandPath, or use full path
names when configuring your commands. I always forget to do that.
-Eric
Sirucka, Joseph wrote:
Duncan
Thanks for the help, if I have mibs for the device, how would I add
these.
Also the nagios plugins, seems python setup.py fails.
Is there a different way to install the plugins.
Regards
Joseph
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Duncan McGreggor
Sent: Friday, 24 November 2006 1:03 PM
To: General discussion of using zenoss system
Subject: Re: [zenoss-users] Zendisc howto
On Nov 23, 2006, at 5:34 PM, Sirucka, Joseph wrote:
Duncan
If I can't use dns, can I add the names via /etc/hosts and resolve
them that way.
All that is required is that the name entered is capable of being
located on a network. This includes IP addresses and resolvable names.
Whatever way your system uses resolves names will be used.
Most *NIXes use /etc/nsswitch.conf to determine what lookup mechanisms
to use and in what order they are used. If you have a "files" value for
"hosts" in nsswitch.conf and it comes before any other values in that
line (such as "dns"), then /etc/hosts will be used to resolve names into
IP addresses before any other lookup mechanism is used. This is the
default for most *NIX systems. Thus, making an entry in /etc/hosts
should work for you.
Note that none of that has to do with Zenoss -- it's all system
configuration, etc.
Hope that helps,
d
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
This is an email from Fujitsu Australia Limited, ABN 19 001 011 427. It is
confidential to the ordinary user of the email address to which it was
addressed and may contain copyright and/or legally privileged information. No
one else may read, print, store, copy or forward all or any of it or its
attachments. If you receive this email in error, please return to sender. Thank
you.
If you do not wish to receive commercial email messages from Fujitsu Australia Limited, please email [EMAIL PROTECTED]
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
