Hi Jason,
It would be helpful if you could send the output of the command:
$ zenperfsnmp run -v 10 -d server_name
Also, an snmp walk of the device would also be helpful:
$ snmpwalk -c public -v 1 server_name
(Substitute your community string for "public" as necessary). Feel free
to send this off list.
-Eric
Jason Spirko wrote:
The devices were added on 01/29/2007. It's weird. Just those two and I have
about a dozen monitoring all same vendor/NIC.
~ Jason
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of John Gardner
Sent: Friday, February 02, 2007 2:35 PM
To: General discussion of using zenoss system
Subject: Re: [zenoss-users] Graph Question
Jason Spirko wrote:
John:
I did as you suggested and I see throughput values for one of the
servers (no graph), but not for the other. I also tried the command
"zenperfsnmp run -d server_name" for both servers. This didn't seem to
help. I remember reading about resetting RRD graphs...but I just don't
remember the command.
I also tried just restarting the Zenoss appliance. No results.
Thanks.
-------------------------
Jason Spirko
Systems Administrator
Xoran Technologies Inc.
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
