Kristopher,
Check your snmp community string for those devices. That's one
possible problem spot.
If you are running zenoss 1.1 or the trunk then we can create a user
command to help debug.
-jason
On Feb 12, 2007, at 2:23 PM, Kristopher D. Dick wrote:
No, it doesn't model at all. It stops with a message "no snmp
found for ip
= nnn.nnn.nnn.nnn"
There's nothing in zenperfsnmp.log about these devices.
Kristopher Dick
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Eric Newton
Sent: Monday, 12 February 2007 11:09
To: General discussion of using zenoss system
Subject: Re: [zenoss-users] SNMP Trouble
Hi Kristopher,
When you add the device, does it model properly?
Are you seeing errors in your zenperfsnmp log?
-Eric
Kristopher D. Dick wrote:
I've several devices that I can snmpwalk without difficulty while
ZenOSS
tells me there's no SNMP detected on these devices. I vaguely
remember
this
issue being discussed before, but I haven't been able to find it
in the
archives.
Also, if anyone has experience getting SNMP data out of an AdTran
600R,
I'd
really appreciate your help off list.
Thanks,
Kristopher D. Dick
Computing Infrastructure Manager
Allied Trade Group
425.814.2515 x227
[EMAIL PROTECTED]
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
