Eric,
Thanks so much. That worked!
-Daniel
Eric Newton wrote:
Hi Daniel,
You need to set zFileSystemMapIgnoreNames. It's a regular
expression, so you can use something like:
/dev|/proc
If you have multiple names. Set the value, use the Manage->Collect
Configuration to remodel the device(s).
-Eric
switchfox wrote:
Hello All,
I have a few file systems that i would rather not alert on. They are
file systems set up just to hold install disks for our OS.
Since the filesystems are exactly large enough to fit one per CD,
they are constantly at 100% in Zenoss.
I went through the Device, then OS, then the links under the File
Systems section and turned the "Monitor" drop-down to False.
When i did this, the graphing stopped, but it has been over 24 hours
and i am still constantly getting new events into the Events tab
complaining about crossing the 90% threshold.
Is this the proper procedure to halt these file systems from creating
events? If so, where should i start looking to troubleshoot?
Thanks,
-Daniel
-------------------- m2f --------------------
Sent using Mail2Forum (http://www.mail2forum.com).
Read this topic online here:
http://community.zenoss.com/forums/viewtopic.php?p=4336#4336
-------------------- m2f --------------------
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
