Eric,

Have we fixed this in the trunk??  I know its come up.

-EAD

On Mar 24, 2007, at 12:05 PM, Todd Davis wrote:

This might be related to some problems I've been reporting (and haven't
heard anything about).

I only have about 110 devices and only about 3 Nagios-type commands running
(and some ssh commands).  The issue I keep running into is the Nagios
commands time out quite often even though running them from the command-line returns almost immediately. After timing out, they usually clear within 5
minutes.

--
Todd

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Allen Sanabria
Sent: Friday, March 23, 2007 2:55 PM
To: General discussion of using zenoss system
Subject: Re: [zenoss-users] Big trouble with zencommand

Hey David, I had this same issues last year, and how I solved it, was by
breaking down those 800 or so devices into multiple monitors.

and by doing that you will have to create new zencommand's
I created a how to a month or so back and someone else created a similar
how to a few days ago.

You are essentially creating another zencommand and putting it into
another monitor.

Reason for all this is to break down how many open files are running
simultaneously under on each monitor

here is essentially what I have been doing

Step 1

create new performance monitor

Step 2

I copied over bin/zenperfsnmp to bin/zenperfsnmp_netapp
contents of zenpersnmp_netapp

(I changed PRGNAME and CFGFILE)

PRGHOME=$ZENHOME/Products/ZenRRD
PRGNAME=zenperfsnmp_netapp.py
CFGFILE=$CFGDIR/zenperfsnmp_netapp.conf
PIDFILE=$VARDIR/$PRGNAME.pid


Step 3


then for /Products/ZenRRD/zenperfsnmp.py i just mad another copy if it
and renamed it to zenperfsnmp_netapp.py and made all instance of
zenperfsnmp point to this instead zenperfsnmp_netapp.
This will create its own log file.


Step 4
then in /bin/zenoss I added zenperfsnmp_netapp under zenperfsnmp

C="$C zenperfsnmp
C="$C zenperfsnmp_netapp"

step 5

copy over etc/zenperfsnmp.conf to etc/zenperfsnmp_netapp.conf

monitor         NetApp

Step 6

restart zenoss

Step 7 add NetApps to the NetApp performance monitor


_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users

_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users

_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users

Reply via email to