You can get it out of svn... I patched in the change to the trunk.
-Eric
rauchg wrote:
I don't see an attached file. Can you re-submit it?
Thank you,
-gr
jbobjensen at gmail.com wrote:
Folks,
We ran into this problem recently and made a slight adjustment to the
InterfaceMap.py file that lives in:
$ZENHOME/Products/DataCollector/plugins/zenoss/snmp
I have attached the modified file. This is only applicable to certain Cisco devices running CatOS. I have only tested with 6509s and 6513s. This fix changes the interface names from the generic 10/100 utp ethernet to the correct port number, but only the slot/port is listed, like 2/3.
Make a copy of your InterfaceMap.py, then copy the attached InterfaceMap.py to
the path above.
Then run the following against a device to test: zenmodeler run -v 10 -d <yourdevicename> --collect='InterfaceMap' --force
You have to use the --force option because zenmodeler will not remodel devices
that haven't changed.
Let me know if this helps and if you run into any problems.
BobJ
-------------------- m2f --------------------
Read this topic online here:
http://community.zenoss.com/forums/viewtopic.php?p=5526#5526
-------------------- m2f --------------------
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
